RF5605 Datasheet, PDF (2/17 Pages) RF Micro Devices – 5.0V, 2.4GHz TO 2.5GHz HIGH POWER FRONT END MODULE

RF5605
Absolute Maximum Ratings
Parameter
Supply Voltage (RF Applied)
Supply Voltage (No RF Applied)
DC Supply Current (RMS)
Input RF Power with 50 Output
Load.
Maximum VSWR with no Damage
Operating Ambient Temperature
Storage Temperature
Maximum Juction Temperature
T_J-MAX
Moisture Sensitivity
Rating
-0.5 to +5.25
-0.5 to +6.0
1200
+10
10:1
-40 to +85
-40 to +150
175
MSL3
Unit
V
V
mA
dBm
°C
°C
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.
Parameter
Typical Conditions
Tx Performance - 11g/n
Frequency
802.11n Output Power
11n EVM
802.11g Output Power
11g EVM
Second Harmonic
Third Harmonic
Tx Performance - 11b
802.11b output power
ACP1
ACP2
Tx Performance - Generic
Gain
Gain variation over Temp
Low Gain Mode - gain reduction
Power Detect Range
Power Detect Voltage
Input Return Loss at TX_IN pin
Output Return Loss at ANT pin
Operating Current
Quiescent Current
PAE (Power Added Efficiency)
I_REG
P_DOWN Current - V_REG supply
P_DOWN Current - V_CC Supply
Leakage Current
Power Supply - V_CC
Specification
Min. Typ. Max.
2412
2484
26.5
27
2.5
3
27
27.5
2.5
3
-40
-32
-50
-40
28.5
29
-36
-32
-56
-52
Unit
Condition
T=25 °C, V_CC=5.0V, V_REG=2.85V, using an
IEEE802.11g waveform, 54MBps, unless otherwise
noted
Compliance with standard 802.11g/n
MHz
dBm 802.11n HT20 and HT40 MCS7
%
dBm 802.11g 64QAM 54Mbps
%
dBm/MHz At rated P_OUT
dBm/MHz At rated P_OUT
Compliance with standard 802.11b
dBm 802.11b 1MBps
dBc 802.11b 1MBps
dBc 802.11b 1MBps
32
35
37
dB
+/-2.5
dB Over temerature of -40°C to +85˚C
23
dB Drop in gain versus high gain mode by setting V_REG2=0
0.2
1.7
V
P_OUT=0dBm to 30dBm
1.25
V
At rated P_OUT
10
15
dB In specified frequency band
7
9
dB In specified frequency band
900
1000
mA At rated P_OUT
525
600
mA V_CC=5.0, V_REG=2.85V and RF=OFF
17
%
At rated P_OUT (PA only)
7
10
mA in Tx mode
10
12.5
mA P_DOWN=0V, V_REG=2.85V, V_CC=5V
1.7
2.5
mA P_DOWN=0V, V_REG=2.85V, V_CC=5V
0.4
1
mA V_CC=5V, V_REG=0V, P_DOWN=0V
5
5.25
V
2 of 17
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS120213