RF5345 Datasheet, PDF (2/20 Pages) RF Micro Devices – 2.4GHz TO 2.5GHz, 802.11b/g/n WiFi FRONT END MODULE

RF5345
Absolute Maximum Ratings
Parameter
DC Supply Voltage
DC Supply Current
Operating Temperature Range
(Full Spec Compliant)
Extreme Operating Temperature
(Derated Performance)
Storage Temperature
Maximum TX Input Power for
11b/11g/11n (No Damage)
Solder Reflow Temperature
Moisture Sensitivity
Rating
5.0
240
-10 to +75
-40 to -10
+75 to +85
-40 to +150
+5
260
MSL2
Unit
V
mA
°C
°C
°C
°C
dBm
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
Parameter
Specification
Unit
Min. Typ. Max.
Condition
2.4GHz Transmit Parameters
Compliance
IEEE802.11b, IEEE802.11g,
FCC CFG 15.247,.205,.209, EN and JDEC
Operating Conditions
V_CC=3.0V to 4.8V, V_REG=2.75V to 3.0V, Switch Control
voltage=2.7V to 4.8V,
Temp=-10°C to +75°C, Freq=2.4GHz to 2.5GHz,
pulsed at 1% to 99% duty cycle, unless otherwise noted
Frequency
2.4
2.5
GHz
Output Power
11g 15.5
17
dBm Measured with standard IEEE 802.11g waveform,
OFDM, 54Mbps, 64QAM meeting EVM requirements
11b 18.5
20
dBm Measured with standard IEEE 802.11b waveform,
1Mbps, CCK, meeting ACP requirements
EVM*
3.3
4.0
%
At rated output power into 50 output (Dynamic and
Non-Dynamic)
Adjacent Channel Power
ACP1
-36
-33
dBc At rated output power
ACP2
-56
-52
dBc At rated output power
Gain
23
25
dB
Gain Variation
V_CC (average) -0.5
0.5
dB/V
Frequency -0.5
+0.5
dB In-band frequency slope
Power Detect
Power Range
0
23
dBm
Voltage Range 0.2
2.0
V
Input Resistance
10
k
Input Capacitance
5
pF
Sensitivity
P_DETECT Accuracy
-1
+1
dB
P_OUT = 17 dBm
>10dBm 25
mV/dB
0 < P_OUT < 10 dBm
8
mV/dB
*The EVM specification is obtained with a signal generator that has an EVM level <0.7%.
2 of 20
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS120215