RF5189_11 Datasheet, PDF (2/12 Pages) RF Micro Devices – 2.45GHz LINEAR POWER AMPLIFIER

RF5189
Absolute Maximum Ratings
Parameter
Supply Voltage
Power Control Voltage (V_REG)
DC Supply Current
Input RF Power
Operating Ambient Temperature
Storage Temperature
Moisture sensitivity
Rating
-0.5 to +6.0
-0.5 to 3.5
600
+10
-40 to +85
-40 to +150
JEDEC Level 2
Unit
V_DC
V
mA
dBm
°C
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
Parameter
Overall-11b Signal
Frequency Range
Maximum Linear Output Power
Specification
Min.
Typ.
Max.
2400 to 2500
V_CC = 3.0 V
21
22
V_CC = 5.0 V
24
Linear Efficiency
24
Small Signal Gain
23
25
27
Second Harmonic
802.11B Adjacent Channel Power
-35
-38
-32
Alternate Channel Power
-56
-52
Isolation
30
Input Return Loss
Output VSWR
Power Detect Voltage
9.5
15.0
2:1
1.5:1
1.7
2.1
2.4
Power Down
V_REG “ON”
2.1
2.7
3.0
V_REG “OFF”
0
0.5
Power Supply
Operating Voltage
Current Consumption
V_REG Current (Total)
3.0 to 5.0
10
100
160
220
270
5
10
10
15
Unit
MHz
dBm
dBm
%
dB
dBc
dBc
dBc
dB
dB
V
Condition
T=25°C, V_CC=3.0V, V_REG=2.7V,
Freq = 2450 MHz
With 802.11B modulation (11Mbit/s) and
meeting 802.11B spectral mask.
P_IN = -7 dBm
P_OUT=21dBm, V_CC=3.0V
P_OUT=21dBm, V_CC=3.0V
In “OFF” state, P_IN=-5.0dBm
50 reference
50 reference
P₀ = 21 dBm
V
Voltage supplied to control input;
device is “ON”
V
Voltage supplied to control input;
device is “OFF”
V
A
V_REG = 0 V
mA
No RF input, V_CC=3.0V, and V_REG=2.7V
mA
P_OUT=21dBm, V_CC=3.0V, and V_REG=2.7V
mA
V_CC = 3.0 V
mA
V_CC = 5.0 V
2 of 12
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS110617