English
Language : 

RF5117C_1 Datasheet, PDF (2/12 Pages) RF Micro Devices – 3V, 1.8GHz TO 2.8GHz LINEAR POWER AMPLIFIER
RF5117C
Absolute Maximum Ratings
Parameter
Supply Voltage
Power Control Voltage (VREG)
DC Supply Current
Input RF Power
Operating Ambient Temperature
Storage Temperature
Moisture Sensitivity
Rating
-0.5 to +6.0
-0.5 to 3.5
600
+10
-40 to +85
-40 to +150
JEDEC Level 2
Unit
VDC
V
mA
dBm
°C
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
Parameter
Specification
Min.
Typ.
Max.
Overall
Frequency Range
Maximum Linear Output Power
1800 to 2800
VCC = 3.0 V
22
VCC = 5.0 V
27
Linear Efficiency
25
Error Vector Magnitude (EVM)
2.5
Small Signal Gain
24
Reverse Isolation
30
Second Harmonic
802.11B Adjacent Channel Power
Alternate Channel Power
Isolation
35
Input Impedance
Input VSWR
Power Down
VREG “ON”
2.1
VREG “OFF”
Power Supply
Operating Voltage
Current Consumption
VREG Current (Total)
26
28.5
-35
-38
-32
-56
-52
45
50
2:1
2.7
3.0
0
0.5
3.0 to 5.0
500
200
220
110
5
10
10
15
Unit
MHz
dBm
dBm
%
%
dB
dB
dBc
dBc
dBc
dB
Ω
Condition
T=25 °C, VCC=3.0V, VREG=2.7V,
Freq=2450MHz, circuit per evaluation board
schematic.
With 802.11B modulation (11Mbit/s) and
meeting 802.11B spectral mask.
PO=17dBm, EVM increases over 11g,
54MBPS signal input
PIN = -7 dBm
POUT=21dBm, VCC=3.0V
POUT=21dBm, VCC=3.0V
In “OFF” state, PIN=-5.0dBm
With external matching
With external matching
V
Voltage supplied to control input; device is
“ON”
V
Voltage supplied to control input; device is
“OFF”
V
mA
At max output power
mA
POUT=21dBm, VCC=3.0V
mA
Idle current, VCC=3.0V, VREG=2.7V
mA
VCC = 3.0 V
mA
VCC = 5.0 V
2 of 12
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
Rev A6 DS071018