R0605250 Datasheet, PDF (2/3 Pages) RF Micro Devices – Si Reverse Hybrid 5MHz to 65MHz

R0605250
Nominal Operating Parameters
Parameter
Specification
Unit
Min Typ Max
Condition
General Performance
Power Gain
Slope^[1]
Flatness of Frequency Response
Input Return Loss
Output Return Loss
Noise Figure
Total Current Consumption (DC)
Distortion Data 5MHz to 65MHz
V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω
24.9 25.5 26.4 dB f = 5MHz
24.7 25.7
dB f = 65MHz
-0.2 0.2 0.5 dB
±0.2 dB
f = 5MHz to 65MHz
20.0
dB
20.0
dB
2.3 3.0 dB f = 65MHz
170 190 200 mA
V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω
CTB
XMOD
-74 dBc
-64 dBc ^{7 ch flat; V}0 ^{= 50dBmV[2]}
CSO
-72 dBc
d2
-74 dBc [3]
STB
-76 dB [4]
1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency.
2. 7 channels, NTSC frequency raster: T7 - T13 (7.0MHz to 43.0MHz), +50dBmV flat output level.
3. f1 = 7MHz; V1 = 50dBmV; f2 = 25MHz; V2 = 50dBmV; fTEST = f1 + f2 = 32MHz.
4. f1 = 13MHz; V1 = 50dBmV; f2 = 25MHz; V2 = V1; f3 = 7MHz; V3 = V1; fTEST = f1 + f2 - f3 = 31MHz.
Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by the NCTA.
Composite Triple Beat (CTB) - The CTB parameter is defined by the NCTA.
Cross Modulation (XMOD) - Cross modulation (XMOD) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the
carrier being tested.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140124
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 3