PS-4-500F Datasheet, PDF (2/3 Pages) RF Micro Devices – Low Insertion Loss

PS-4-500F
Absolute Maximum Ratings
Parameter
Operating Temperature Range
Input Power (1/20 Watt Internal Load Dissipation)
Rating
-54 to +100
1
Unit
°C
W
Caution! ESD sensitive device.
Environmental Conditions
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Guaranteed Environmental Performance: All units are designed to meet their specifications between -54°C and +100°C
after exposure to any or all of the following tests per MIL-STD-202E.
 Thermal Shock: Method 107D, Test Condition B
 Altitude: Method 105C, Test Condition G
 H.F. Vibration: Method 204C, Test Condition D
 Mechanical Shock: Method 213B, Test Condition C
 Random Vibration (15 minutes per axis): Method 214, Test Condition IIF
 Solderability: Method 208C
 Terminal Strength: Method 211A, Test Condition C
 Resistance to Soldering Heat: Method 210A, Test Condition B
Sealed units meet the requirements of Method 106D of MIL-STD-202E when exposed to humidity.
Nominal Operating Parameters
Parameter
Specification
Unit
Min Typ Max
General Performance
-1dB Bandwidth
Midband Insertion Loss
5
500 MHz
0.50 dB
Amplitude Unbalance
0.2 dB
Phase Unbalance
2
°
Isolation
VSWR
20
dB
1.4
Specifications subject to change without notice.
Condition
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140313
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 3