DBM-143 Datasheet, PDF (2/4 Pages) RF Micro Devices – Subminiature Flatpack Double Balanced Mixer 10MHz to 1500MHz

DBM-143
Absolute Maximum Ratings
Parameter
Rating
Unit
Operating Temperature Range
-54 to +100
°C
X Port Input Current
50
mA
Total Input Power at 25°C
200
mW
Total Input Power (Derated Linearly) at 100°C
50
mW
Specifications guaranteed with IF from DC to 1000MHz. For higher IF frequencies, consult IF
response curve for typical roll-off.
Environmental conditions: All units are designed to meet their specifications between -54°C and
+100°C and after exposure to any or all of the following tests per MIL-STD-202E.
 Thermal Shock: Method 107D, Test Condition B
 Altitude: Method 105C, Test Condition G
 H.F. Vibration: Method 204C, Test Condition D
 Mechanical Shock: Method 213B, Test Condition C
 Random Vibration (15 minutes per axis): Method 214, Test Condition IIF
 Solderability: Method 208C
 Terminal Strength: Method 211A, Test Condition C
 Resistance to Soldering Heat: Method 210A, Test Condition B
Sealed units meet the requirements of Method 106D of MIL-STD-202E when exposed to
humidity.
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Nominal Operating Parameters
Parameter
Specification
Unit
Min Typ Max
Condition
General Performance
LO +7dBm (High side LO), RF -10dBm, IF 100MHz
Operating Frequency Range
L Port
10
1500 MHz
R Port
10
1500 MHz
X Port
DC
1000 MHz
Specifications guaranteed with IF from DC to 1000MHz. For higher IF frequencies, consult IF response curve for typical roll-off.
Frequency Bands
10MHz to 600MHz (dB)
600MHz to 1200MHz (dB)
1200MHz to 1500MHz (dB)
Conversion Loss
8.5
7.5
9.5
L-R Isolation
30
25
25
L-X Isolation
30
20
18
R-X Isolation
25
15
10
Specifications guaranteed with IF from DC to 1000MHz. For higher IF frequencies, consult IF response curve for typical roll-off.
DC Polarity
Positive with L and R port signals in-phase.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS131030
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 4