RFSA2023 Datasheet, PDF (16/17 Pages) RF Micro Devices – VOLTAGE CONTROLLED ATTENUATOR

RFSA2023
Evaluation Board Assembly Drawing
Evaluation Board Bill of Materials (BOM)
Description
Reference Designator
Manufacturer
Voltage Controlled Attenuator VCA, 3.3V
U1
RFMD
CONN, SMA, END LNCH, MINI, FLT, 0.068”
J1-J2
Emerson Network Power
CONN, HDR, ST, 4-PIN, 0.100”, T/H
P1
MOLEX
PCB, SA2013-410
DDI
CAP, 1000pF, 10%, 25V, X7R, 0402
C1-C3
Murata Electronics
CAP, 1F, 10%, 16V, X7R, 1206
C4
Murata Electronics
RES, 0, 5%, 0402
R5
Kamaya, Inc
DNP
C5-C9
N/A
DNP
R1-R4
N/A
DNP
P2
N/A
Manufacturer’s P/N
RFSA2023
142-0741-851
22-28-4043
SA2013-410
GRM155R71H102KA01D
GRM31MR71E105KC01L
RMC1/16SJPTH
N/A
N/A
N/A
Notes:
1. Manufacturers' P/Ns are subject to change by the manufacturers following the issue of this document and are thereby
included for reference only.
2. Contact RFMD Corporate Engineering Materials with questions regarding specific manufacturers' P/Ns.
16 of 17
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS120813