RFSA3714 Datasheet, PDF (11/20 Pages) RF Micro Devices – 50MHz to 6000MHz, Digital Step Attenuator

RFSA3714
Evaluation Board Bill of Materials (BOM) 50MHz to 6000MHz Application Circuit
Description
Reference Designator
Manufacturer
Manufacturer's P/N
SA3714-410
Digital Step Attenuator 50MHz to 6000MHz
CAP, 1µF, 10%, 25V, X7R, 1206
CONN, SMA, END LNCH, UNIV, HYB
MNT
CONN, HDR, ST, 9-PIN, 0.100”
CONN, SKT, 24-PIN DIP, 0.600”, T/H
MOD, USB TO SERIAL UART, SSOP-28
CONN, HDR, ST, 3 x 5, 0.100”, T/H
CONN, HDR, ST, 2-PIN, 0.100:
CONN, HDR, 2 x 4, RA, 0.100, T/H
CONN, HDR, ST, PLRZD, 2-PIN, 0.100”
CAP, 470pF, 5%, 50V, C0G, 0402
Jumper, 2-Pin
DNP
U1
C34
J1-J4
P1
P2
M1 (See Note 1)
P3 (See Note 2)
P4
P5
P6
C40
S1-S2 (See Note 2)
C20-C26, C29, C33,
C35-C39, S6
Dynamic Details (DDI) Toronto
RFMD
Taiyo Yuden (USA), Inc.
Molex
Samtec Inc.
Aries Electronics Inc.
Future Technology Devices Int’l
Samtec Inc.
Samtec Inc.
Samtec Inc.
ITW Pancon
Murata Electronics
3M Interconnect Solutions
N/A
SA3714-410(B)
RFSA3714SB
CE TMK316BJ105KL-T
SD-7351-4000
TSW-109-07-G-S
24-6518-10
UM232R
TSW-105-07-L-T
TSW-102-07-G-S
TSW-104-08-G-D-RA
MPSS100-2-C
GRM1555C1H471JA01D
929950-00
N/A
Notes:
1. M1 should be mounted into P2 with respect to the Pin 1 alignment of M1 and P2.
2. Jumpers S1 and S2 should be installed on P3.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS141203
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
11 of 20