RFSA3715 Datasheet, PDF (10/20 Pages) RF Micro Devices – 5MHz to 4000MHz, Digital Step Attenuator

RFSA3715
Evaluation Board Bill of Materials (BOM)
Description
Reference Designator
Manufacturer
SA3715-410
Digital Step Attenuator 5MHz to 4000MHz
CAP, 1µF, 10%, 25V, X7R, 1206
CONN, SMA, EL FLT VIPER, MAT-21-
1038
CONN, HDR, ST, 9-PIN, 0.100”
CONN, HDR, ST, PLRZD, 2-PIN, 0.100”
CONN, HDR, ST, 3 x 5, 0.100”, T/H
CONN, HDR, ST, 2-PIN, 0.100”
CONN, HDR, 2 x 4, RA, 0.100”, T/H
CONN, SKT, 24-PIN DIP, 0.600”, T/H
MOD, USB TO SERIAL UART, SSOP-28
CAP, 470pF, 5%, 50V, C0G, 0402
Jumper, 2-Pin
DNP
U1
C34
J1-J4
P1
P6
P3
P4
P5
P2
M1 (See Note)
C40
S1-S5
C20-C26, C29-C33,
C35-C39, S6
Dynamic Details (DDI) Toronto
RFMD
Taiyo Yuden (USA), Inc.
Amphenol RF Asia Corportion
Samtec Inc.
ITW Pancon
Samtec Inc.
Samtec Inc.
Samtec Inc.
Aries Electronics Inc.
Future Technology Devices Int’l
Murata Electronics
3M Interconnect Solutions
N/A
Notes:
1. M1 should be mounted into P2 with respect to the Pin 1 alignment of M1 and P2
2. Jumpers S1 thru S5 installed on P3
Manufacturer's P/N
SA3715-410(D)
RFSA3715SB
CE TMK316BJ105KL-T
901-10425
TSW-109-07-G-S
24-6518-10
TSW-105-07-L-T
TSW-102-07-G-S
TSW-104-08-G-D-RA
24-6518-10
UM232R
GRM1555C1H471JA01D
929950-00
N/A
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS150205
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
10 of 20