RFSA3513 Datasheet, PDF (10/16 Pages) RF Micro Devices – 5MHz to 6000MHz, Digital Step Attenuator

RFSA3513
Evaluation Board Bill of Materials (BOM)
Description
RFSA3613-410
Digital Step Attenuator, 5MHz to 6000MHz
CAP, 1µF, 10%, 25V, X7R, 1206
CONN, SMA, END LNCH, UNIV, HYB
MNT, FLT
CONN, HDR, ST, PLRZD, 2-PIN, 0.100”
CONN, HDR, ST, 3 x 5, 0.100”, T/H
CONN, HDR, 2 x 4, RA, 0.100”, T/H
CONN, SKT, 24-PIN DIP, 0.600”, T/H
MOD, USB TO SERIAL UART, SSOP-28
CAP, 470pF, 5%, 50V, C0G, 0402
Jumper, 2-Pin
DNP
Reference Designator
U1
C1
J1-J4
P1
P3
P4
P2
M1 (See Note 1)
C4
S1-S4 (See Note 2)
C5-C13
Manufacturer
Dynamic Details (DDI) Toronto
RFMD
Taiyo Yuden (USA), Inc.
Molex
ITW Pancon
Samtec Inc.
Samtec Inc.
Aries Electronics Inc.
Future Technology Devices Int’l
Murata Electronics
3M Interconnect Solutions
N/A
Notes:
1. M1 should be mounted into P2 with respect to the Pin 1 alignment of M1 and P2.
2. Install S1-S4 into P3 as indicated on the assembly drawing.
Manufacturer's P/N
RFSA3613-410(B)
RFSA3513SB
CE TMK316BJ105KL-T
SD-73251-4000
MPSS100-2-C
TSW-105-07-L-T
TSW-104-08-G-D-RA
24-6518-10
UM232R
GRM1555C1H471JA01D
929950.00
N/A
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS150205
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
10 of 16