RFFM8250Q Datasheet, PDF (1/8 Pages) RF Micro Devices – WiFi Switch + LNA Module 2.4GHz to 2.5GHz Tested in Accordance with AEC-Q100

RFFM8250Q
WiFi Switch + LNA Module
2.4GHz to 2.5GHz
Tested in Accordance with AEC-Q100
The RFFM8250Q provides an integrated Switch + LNA solution in a
single Front End Module (FEM) for automotive WiFi 802.11b/g/n/ac and
Bluetooth systems. The ultra-small form factor and integrated matching
greatly reduces the number of external components and layout area in
the customer applications. This simplifies the total front end solution by
reducing the bill of materials, system footprint, and manufacturing cost.
The RFFM8250Q integrates a Single Pole 3-Throw (SP3T) switch and a
Low Noise Amplifier (LNA) with bypass mode. The device is tested in
accordance with AEC-Q100 and is provided in a 1.75mm x 1.75mm x
0.5mm 10-pin QFN package.
RFMD + TriQuint = Qorvo
RFFM8250Q
Package: QFN, 10-pin,
1.75mm x 1.75mm x 0.5mm
Features
■ SP3T T/R Switch with Bluetooth
Support
■ LNA with Bypass Mode
■ Input and Output Matched to 50Ω
■ Wide Voltage Supply Range
■ Supports WiFi chipsets with
Integrated Power Amplifier (iPA)
■ Low Profile Package for Module
Designs
VTX ₁
TX 2
ANT
VRX
10
9
N/C 3
8 VBT
7 BT
6 _VDD
4
5
RX LNAEN
Functional Block Diagram
Applications
■ Automotive WiFi
■ WiFi Direct
■ Automotive Diagnostics
■ WiFi Infotainment
■ 2.5GHz ISM Band Solutions for
Automotive
Ordering Information
RFFM8250QSB
Standard 5-piece sample bag
RFFM8250QSQ
Standard 25-piece sample bag
RFFM8250QSR
Standard 100-piece reel
RFFM8250QTR7
Standard 2500-piece reel
RFFM8250QPCK-410 Fully assembled evaluation board w/ 5-piece bag
Revision DS20150302
© 2015 RF Micro Devices, Inc.
1 of 8
Disclaimer: Subject to change without notice
www.rfmd.com / www.qorvo.com