NBB-500_13 Datasheet, PDF (1/11 Pages) RF Micro Devices – Cascadable Broadband GaAs MMIC Amplifier DC to 4GHz

NBB-500
Cascadable Broadband GaAs MMIC Amplifier
DC to 4GHz
NBB-500
The NBB-500 cascadable broadband InGaP/GaAs MMIC amplifier is a
low-cost, high-performance solution for general purpose RF and
Package: Micro-X, 4-pin, Ceramic
microwave amplification needs. This 50Ω gain block is based on a
reliable HBT proprietary MMIC design, providing unsurpassed
performance for small-signal applications. Designed with an external
bias resistor, the NBB-500 provides flexibility and stability. The NBB-
500 is packaged in a low cost, surface-mount ceramic package,
providing ease of assembly for high-volume tape-and-reel
Features
■ Reliable, Low-Cost HBT Design
■ 19.0dB Gain, +12.3dBm
P1dB at 2Ghz
■ High P1dB of
+14.0dBm at 6.0GHz
requirements. It is available in either packaged or chip (NBB-500-D) _{■ Single Power Supply Operation}
form, where its gold metallization is ideal for hybrid circuit designs.
■ 50Ω I/O Matched for High
Frequency Use
Functional Block Diagram
Applications
■ Narrow and Broadband
Commercial and Military Radio
Designs
■ Linear and Saturated Amplifiers
■ Gain Stage or Driver Amplifiers
for MWRadio/Optical Designs
(PTP/PMP/LMDS/UNII/VSAT/
WLAN/Cellular/DWDM)
Ordering Information
NBB-500
Cascadable Broadband GaAs MMIC Amplifier DC to 4GHz
NBB-500-T1
Tape & Reel, 1000 Pieces
NBB-500-D
NBB-500 Chip Form (100 pieces minimum order)
NBB-500-E
Fully Assembled Evaluation Board
NBB-X-K1
Extended Frequency InGaP Amp Designer’s Tool Kit
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS131004
RF MICRO DEVICES^® and RFMD^® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 11