NBB-400 Datasheet, PDF (1/10 Pages) RF Micro Devices – CASCADABLE BROADBAND GaAs MMIC AMPLIFIER DC TO 8GHz

NBB-400
0
RoHS Compliant & Pb-Free Product
Typical Applications
CASCADABLE BROADBAND
GaAs MMIC AMPLIFIER DC TO 8GHz
• Narrow and Broadband Commercial and
Military Radio Designs
• Linear and Saturated Amplifiers
• Gain Stage or Driver Amplifiers for
MWRadio/Optical Designs (PTP/PMP/
LMDS/UNII/VSAT/WLAN/Cellular/DWDM)
Product Description
The NBB-400 cascadable broadband InGaP/GaAs MMIC
amplifier is a low-cost, high-performance solution for gen-
eral purpose RF and microwave amplification needs. This
50Ω gain block is based on a reliable HBT proprietary
MMIC design, providing unsurpassed performance for
small-signal applications. Designed with an external bias
resistor, the NBB-400 provides flexibility and stability. The
NBB-400 is packaged in a low-cost, surface-mount
ceramic package, providing ease of assembly for high-
volume tape-and-reel requirements. It is available in
either packaged or chip (NBB-400-D) form, where its gold
metallization is ideal for hybrid circuit designs.
45°
UNITS:
Inches
(mm)
0.040
(1.02)
0.070
(1.78)
0.020
0.200 sq.
(5.08)
0.055
(1.40)
0.005
(0.13)
Optimum Technology Matching® Applied
Si BJT
GaAs HBT
GaAs MESFET
Si Bi-CMOS
9^InGaP/HBT
SiGe HBT
GaN HEMT
Si CMOS
SiGe Bi-CMOS
GND
4
MARKING - N4
Package Style: Micro-X, 4-Pin, Ceramic
Features
• Reliable, Low-Cost HBT Design
• 15.5dB Gain, +15.0dBm P1dB@2GHz
• High P1dB of +14.6dBm@6.0GHz
• Single Power Supply Operation
• 50Ω I/O Matched for High Freq. Use
RF IN 1
3 RF OUT
2
GND
Functional Block Diagram
Rev A8 060124
Ordering Information
NBB-400
Cascadable Broadband GaAs MMIC Amplifier DC to
8 GHz
NBB-400-T1
Tape & Reel, 1000 Pieces
NBB-400-D
NBB-400 Chip Form (100 pieces minimum order)
NBB-400-E
Fully Assembled Evaluation Board
NBB-X-K1
Extended Frequency InGaP Amp Designer’s Tool Kit
RF Micro Devices, Inc.
Tel [phone]
7628 Thorndike Road
Fax [phone]
Greensboro, NC 27409, USA
http://www.rfmd.com
4-33