NBB-310 Datasheet, PDF (1/10 Pages) RF Micro Devices – CASCADABLE BROADBAND GaAs MMIC AMPLIFIER DC TO 12GHz

NBB-310
0
CASCADABLE BROADBAND
GaAs MMIC AMPLIFIER DC TO 12GHz
Typical Applications
• Narrow and Broadband Commercial and
Military Radio Designs
• Linear and Saturated Amplifiers
• Gain Stage or Driver Amplifiers for
MWRadio/Optical Designs (PTP/PMP/
LMDS/UNII/VSAT/WLAN/Cellular/DWDM)
Product Description
The NBB-310 cascadable broadband InGaP/GaAs MMIC
amplifier is a low-cost, high-performance solution for gen-
eral purpose RF and microwave amplification needs. This
50Ω gain block is based on a reliable HBT proprietary
MMIC design, providing unsurpassed performance for
small-signal applications. Designed with an external bias
resistor, the NBB-310 provides flexibility and stability. The
NBB-310 is packaged in a low-cost, surface-mount
ceramic package, providing ease of assembly for high-
volume tape-and-reel requirements. It is available in
either packaged or chip (NBB-310-D) form, where its gold
metallization is ideal for hybrid circuit designs.
45°
UNITS:
Inches
(mm)
0.040
(1.02)
0.070
(1.78)
0.020
0.200 sq.
(5.08)
0.055
(1.40)
0.005
(0.13)
Optimum Technology Matching® Applied
Si BJT
GaAs HBT
GaAs MESFET
Si Bi-CMOS
9^InGaP/HBT
SiGe HBT
GaN HEMT
Si CMOS
SiGe Bi-CMOS
GND
4
MARKING - N6
Package Style: Micro-X, 4-Pin, Ceramic
Features
• Reliable, Low-Cost HBT Design
• 13dB Gain
• High P1dB of +15.2dBm at 6GHz
• Single Power Supply Operation
• 50Ω I/O Matched for High Freq. Use
RF IN 1
3 RF OUT
2
GND
Functional Block Diagram
Rev A5 030912
Ordering Information
NBB-310
Cascadable Broadband GaAs MMIC Amplifier DC to
12 GHz
NBB-310-T1 or -T3Tape & Reel, 1000 or 3000 Pieces (respectively)
NBB-310-D
NBB-310 Chip Form (100 pieces minimum order)
NBB-310-E
Fully Assembled Evaluation Board
NBB-X-K1
Extended Frequency InGaP Amp Designer’s Tool Kit
RF Micro Devices, Inc.
Tel [phone]
7628 Thorndike Road
Fax [phone]
Greensboro, NC 27409, USA
http://www.rfmd.com
4-17