CGB-1089Z Datasheet, PDF (1/8 Pages) SIRENZA MICRODEVICES – 50 - 1000 MHz Single Ended InGaP/GaAs HBT MMIC CATV Amplifier

CGB-1089Z
50Mhz to
1000MHz Sin-
gle Ended
InGaP/GaAs
HBT MMIC
CATV Amplifier
CGB-1089Z
50MHz to 1000MHz SINGLE ENDED
InGaP/GaAs HBT MMIC CATV AMPLIFIER
Product Description
RFMD’s CGB-1089Z is a high performance InGaP HBT MMIC amplifier uti-
lizing a Darlington configuration with a 75Ω active bias network. The
active bias network provides stable current over temperature and process
Beta variations. Designed to run directly from a 5V supply, the CGB-1089Z
does not require a dropping resistor as compared to typical Darlington
amplifiers. The CGB-1089Z product is designed for high linearity 5V gain
block applications that require small size and minimal external compo-
nents. It is internally matched to 75Ω.
Gain & Return Loss
Optimum Technology
Matching® Applied
18
10
9 ^{GaAs HBT}
16
5
GaAs MESFET
14
9 ^{InGaP HBT}
12
db(S21)
0
-5
SiGe BiCMOS
db(S11)
10
Si BiCMOS
db(S22)
-10
8
SiGe HBT
-15
6
GaAs pHEMT
-20
4
Si CMOS
2
-25
Si BJT
GaN HEMT
RF MEMS
0
50
-30
150
250
350
450
550
650
750
850
950
Frequency MHz
Features
„ Flat Gain
Response: 16 dB ± 0.4 dB
„ Excellent Return Loss:21dB
„ Low Distortion:-77/-65dBc
CTB/CSO
„ Single Fixed 5V Supply
„ Robust 1000V ESD, Class 1C
Applications
„ CATV Network Amplifiers
„ CATV Drop Amplifiers
„ Optical Rx/Tx
„ FTTH Video Solutions
Parameter
Specification
Min.
Typ.
Max.
Unit
Condition
Small Signal Gain
14.5
16.0
17.5
dB
500 MHz
Output Power at 1dB Compression
16.5
18.0
dBm
500 MHz
Third Order Intercept Point
35.0
dBm
500 MHz
Second Order Intercept Point
50.0
dBm
500 MHz
79Ch., Flat Tilt, 25dBmV,
-65.0
dBc
CSO
79Ch., Flat Tilt, 25dBmV
-77.0
dBc
CTB
79Ch., Flat Tilt, 25dBmV
76.0
dBc
XMOD
Worst Case Input Return Loss
18.0
19
dB
50MHz to 1000MHz
Worst Case Output Return Loss
14
15
dB
50MHz to 1000MHz
Noise Figure
3.5
4.0
dB
500 MHz
Reverse Isolation,
19.0
dB
50MHz to 1000MHz
Thermal Resistance
48.8
°C/W
junction - lead
Device Operating Voltage
5.0
V
Device Operating Current
68.0
80.0
92.0
mA
Test Conditions: V_D=5V, I_D=80mA Typ., OIP₃, OIP₂ Tone Spacing=6MHz, P_OUT per tone=0dBm, T_L=25°C, Z_S=Z_L=75Ω, Tested will App Circuit
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trade-
mark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc.
EDS-104857 Rev D
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
1 of 8