SF2093E Datasheet, PDF (1/6 Pages) RF Monolithics, Inc – 915.00 MHz SAW Filter

• Steep Roll-off Filter for 915 MHz ISM band
• Differential Input / Single-ended Output
• Complies with Directive 2002/95/EC (RoHS) _Pb
Absolute Maximum Ratings
Rating
Input Power Level
DC Voltage on any Non-ground Terminal
Operating Temperature Range
Storage Temperature Range in Tape and Reel
Suitable for Lead-free Soldering - Maximum Soldering Profile
Electrical Characteristics
Characteristic
Center Frequency
Insertion Loss, 902 to 928 MHz
Amplitude Ripple, p-p, 902 to 928 MHz
VSWR, 902 to 928 MHz
Attenuation Referenced to 0 dB:
DC to 800 MHz
850 to 870 MHz
960 to 1035 MHz
1035 to 1500 MHz
1500 to 3000 MHz
Source Impedance
Load Impedance
Case Style
Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator
Standard Reel Quantity
Reel Size 7 Inch
Reel Size 13 Inch
Electrical Connections
Connection
Input, Balanced
Output, Single Ended
Case Ground
Terminals
1, 3
6
All others
SF2093E
Value
Units
+15
dBm
3
V
-30 to +85
°C
-40 to +85
°C
260°C for 30 s
915.00 MHz
SAW Filter
SM3030-8
Sym Notes
Min
f_C
IL
Typ
915.00
2.5
0.5
1.75
Max
3.5
2.0
2.4
Units
MHz
40
54
dB
35
54
28
36
40
57
30
56
Z_S
800
Ω
Z_L
50
Ω
SM3030-8 3.0 x 3.0 mm Nominal Footprint
582, YWWS
500 Pieces/Reel
3000 Pieces/Reel
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance
matching to 50 Ω and measured with 50 Ω network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external
impedance matching design. See Application Note No. 42 for details.
4. The design, manufacturing process, and specifications of this filter are subject to change.
5. US and international patents may apply.
6. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
www.RFM.com E-mail: [e-mail]
©2009-2014 by RF Monolithics, Inc.
Page 1 of 6
SF2093E - 3/24/14