English
Language : 

RO2166A Datasheet, PDF (1/2 Pages) RF Monolithics, Inc – 857.65 MHz SAW Resonator
Preliminary
®
• Ideal for European 857.65 MHz Transmitters
• Very Low Series Resistance
• Quartz Stability
• Surface-Mount Ceramic Case with 21 mm2 Footprint
• Complies with Directive 2002/95/EC (RoHS)
The RO2166A is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount ceramic case.
It provides reliable, fundamental-mode, quartz frequency stabilization of local oscillators operating at 857.65
MHz. This SAW is designed for 868.35 MHz superhet receivers with 10.7 MHz IF. Applications include
remote-control and wireless security receivers operating under ETSI-ETS 300 220 in Europe and under FTZ
17 TR 2100 in Germany.
Absolute Maximum Ratings
CW RF Power Dissipation
Rating
DC Voltage Between Terminals
Case Temperature
Soldering Temperature (10 seconds / 5 cycles max.)
Value
+0
±30
-40 to +85
260
Units
dBm
VDC
°C
°C
RO2166A
RO2166A-1
RO2166A-2
857.65 MHz
SAW
Resonator
SM-2 Case
Electrical Characteristics
Characteristic
Frequency (+25 °C)
Nominal Frequency
RO2166A
RO2166A-1
RO2166A-2
Tolerance from 857.65 MHz RO2166A
RO2166A-1
RO2166A-2
Insertion Loss
Quality Factor
Unloaded Q
50 Ω Loaded Q
Temperature Stability
Turnover Temperature
Turnover Frequency
Frequency Temperature Coefficient
Frequency Aging
Absolute Value during the First Year
DC Insulation Resistance between Any Two Terminals
RF Equivalent RLC Model Motional Resistance
Motional Inductance
Motional Capacitance
Transducer Static Capacitance
Test Fixture Shunt Inductance
Lid Symbolization
Sym
fC
∆fC
IL
QU
QL
TO
fO
FTC
|fA|
RM
LM
CM
CO
LTEST
Notes
2, 3, 4,
5
2, 5, 6
5, 6, 7
6, 7, 8
1
5
5, 6, 7,
9
5, 6, 9
2, 7
Minimum
857.575
857.500
857.550
Typical
1.1
24,700
4,000
15
30
fC
0.032
10
1.0
19
88.546
0.3889
2.8
3.1
11.1086
262
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
Maximum
857.725
857.800
857.750
±75
±150
±100
2.0
45
3.4
Units
MHz
kHz
dB
°C
kHz
ppm/°C2
ppm/yr
MΩ
Ω
µH
fF
pF
nH
1. Frequency aging is the change in fC with time and is specified at +65°C or less. 7. Derived mathematically from one or more of the following directly measured
Aging may exceed the specification for prolonged temperatures above +65°C.
parameters: fC, IL, 3 dB bandwidth, fC versus TC, and CO.
Typically, aging is greatest the first year after manufacture, decreasing in subse- 8. Turnover temperature, TO, is the temperature of maximum (or turnover) fre-
quent years.
quency, fO. The nominal frequency at any case temperature, TC, may be calcu-
2. The center frequency, fC, is measured at the minimum insertion loss point,
ILMIN, with the resonator in the 50 Ω test system (VSWR ≤ 1.2:1). The shunt
inductance, LTEST, is tuned for parallel resonance with CO at fC. Typically, fOS-
lated from: f = fO [1 - FTC (TO -TC)2]. Typically oscillator TO is approximately
equal to the specified resonator TO.
9. This equivalent RLC model approximates resonator performance near the reso-
CILLATOR or fTRANSMITTER is approximately equal to the resonator fC.
3. One or more of the following United States patents apply: 4,454,488 and
nant frequency and is provided for reference only. The capacitance CO is the
static (nonmotional) capacitance between the two terminals measured at low
4,616,197.
frequency (10 MHz) with a capacitance meter. The measurement includes para-
4. Typically, equipment utilizing this device requires emissions testing and govern-
sitic capacitance with "NC” pads unconnected. Case parasitic capacitance is
ment approval, which is the responsibility of the equipment manufacturer.
approximately 0.05 pF. Transducer parallel capacitance can by calculated as:
5. Unless noted otherwise, case temperature TC = +25°C±2°C.
6. The design, manufacturing process, and specifications of this device are subject
CP ≈ CO - 0.05 pF.
to change without notice.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: info@rfm.com
http://www.rfm.com
RO2166A-050901
Page 1 of 2