RWP15040-10 Datasheet, PDF (4/6 Pages) RFHIC – Wideband Power Amplifier

Wideband Power Amplifier
RWP15040-10
Precautions
1. This product is designed to be used for broadband amplification. Heat generation is higher when there is RF signal in the device.
Therefore, the worst case scenario is when there is RF signal.
The temperature must be calculated properly.
Case temperature must maintain below 80°C.
2. Thermal Grease or Metal Thermal Interface Materials are recommended for heat dissipation. An example would be spreading
thermal grease on the bottom of the device.
Korean Facilities : 82-31-250-5078 / [e-mail]
US Facility : 919-677-8780 / [e-mail]
4/6
All specifications may change without notice
Version 1.2