RWP15080-10 Datasheet, PDF (3/5 Pages) RFHIC – Wideband Power Amplifier

Wideband Power Amplifier
RWP15080-10
Typical Performance @ 25°C
Frequency
(MHz)
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
Pout
@Pin -3dBm
(dBm)
50.47
49.45
51.07
50.18
50.87
50.33
49.42
50.01
50.00
49.78
49.66
49.88
50.07
50.29
50.04
49.81
49.45
49.21
49.26
50.03
49.22
Gp
@Pin -3dBm
(dB)
53.47
52.45
54.07
53.18
53.87
53.33
52.42
53.01
53.00
52.78
52.66
52.88
53.07
53.29
53.04
52.81
52.45
52.21
52.26
53.03
52.22
Current
@Pin -3dBm
(A)
10.47
9.04
9.80
8.92
8.41
6.98
5.85
8.07
8.41
8.30
8.64
9.43
9.89
9.53
9.20
8.68
8.24
7.74
7.97
8.44
7.75
PAE
@ Pin -3dBm
(%)
33.26
30.46
40.80
36.52
45.40
48.31
46.74
38.81
37.16
35.79
33.45
32.24
32.11
35.06
34.28
34.46
33.41
33.66
33.07
37.28
33.69
Harmonic
2^nd Harm
3^rd Harm
(dBc)
(dBm)
-12.26
-31.88
-15.66
-22.20
-16.51
-21.79
-24.97
-24.46
-40.08
-38.36
-19.76
-18.99
-33.86
-18.83
-28.13
-34.43
-34.02
-43.59
-30.48
-40.04
-54.08
-56.70
-35.86
-21.00
-64.36
-58.44
-21.04
-41.85
-47.34
-42.68
-45.14
-49.81
-61.68
-59.77
-62.21
-51.35
-63.68
-69.88
-57.91
-61.61
-46.57
-55.20
Precautions
1. This product is designed to be used for broadband amplification. Heat generation is higher when there is RF signal in the device.
Therefore, the worst case scenario is when there is RF signal.
The temperature must be calculated properly.
Case temperature must maintain below 70°C.
2. Thermal Grease or Metal Thermal Interface Materials are recommended for heat dissipation. An example would be spreading
thermal grease on the bottom of the device.
Korean Facilities : 82-31-250-5078 / [e-mail]
US Facility : 919-677-8780 / [e-mail]
3/5
All specifications may change without notice
Version 1.2