RFC1G21H4-24-S Datasheet, PDF (3/5 Pages) RFHIC – Guaranteed Broadband Power Gain

Wideband Amplifier
Note for Correct Use
RFC1G21H4-24-S
1. On the power input port (Pin#5), 47uF/35V capacitor GND is
recommended.
2. Heat sink should be placed as tight as possible to the metal case.
3. Pay attention when handling electrostatic-sensitive devices.
- Person at a workbench should be earthed via a wrist strap and a resistor.
- All mains-powered equipment should be connected to the mains via an
earth-leakage switch.
- Equipment cases should be grounded.
- Relative humidity should be maintained between 40% and 50%.
- An ionizer is recommended.
- Keep static materials, such as plastic envelopes and plastic trays etc.,
away from the workbench.
4. One must put the power off, before adjusting the in/output matching of
the system.
5. Pay close attention to the input voltage not to over power the hybrid.
6. Do not open the Plastic cover to change the matching inside the hybrid.
Korean Facilities : 82-31-8069-3036 / [e-mail]
US Facility : 919-677-8780 / [e-mail]
3/5
All specifications may change without notice
Version 1.5