RWP05020-10_1 Datasheet, PDF (1/6 Pages) RFHIC – Wideband Power Amplifier

Wideband Power Amplifier RWP05020-10
Product Features
0B
GaN on SiC Broadband High Power Amplifier
20 to 1000MHz Operation Bandwidth
Small Signal Gain 38dB min
20W Typical. P3dB
Application
1B
HF/VHF/UHF
Package : DP-75
Description
2B
The power amplifier module is designed for Broadcasting, Telecommunication, Medical and Other markets.
Operating frequency range is from 20MHz to 1000MHz.
Gallium Nitride on SiC technology is used and attached on an aluminum sub carrier. Full in/out matching for broadband
performance is already applied.
Improved thermal handling by patented technology.
Typical Specifications
No
Item
1 Bandwidth
2 Small Signal Gain
3 Gain Variation vs Temperature
4 Gain Variation vs Frequency
5 P₃dB
OIP3 @ Po = +33dBm
6
(1MHz Tone spacing, CW 2-Tone)
7 Input Return Loss
8 Output Return Loss
9 2^nd Harmonic suppression
10 Supply Voltage
11 Quiescent Current consumption
12 Current Consumption @ P₃dB
13 On/Off Switching Time
Shut Down or Switch On/Off
14
TTL Voltage
Conditions
V_CC = +28V; T = 25℃; Z_S = Z_L = 50Ω
Min Typ Max Unit
20
1000 MHz
38
40
42
dB
-20°C to 60°C
-2
+2
dB
±1 ±1.5 dBpp
20MHz to 400MHz
42
44
dBm
400 MHz to 1000MHz
41
43
20MHz to 400 MHz
50
53
400 MHz to 700 MHz
47
50
dBm
700 MHz to 1000 MHz
45
47
-15 -10 dB
-10
-7
dB
CW 1-tone
@Po = +30dBm, Freq 500MHz
-35 -30 dBc
Vcc(=Vds)
27.5 28
30
V
1.7 1.9 2.1
A
CW 1-tone
2.3
3
A
On : TTL "Low"
Off : TTL "High"(300mA@Disable)
3
5
uS
On : TTL “Low”(Enable)
Off : TTL “High”
0
0.5
V
2.5
5
5.5
▪ Tel : [phone]
▪ www.rfhic.com/contact
▪ All specifications may change without notice.
▪ Version 2.1