RTP18050-10 Datasheet, PDF (1/9 Pages) RFHIC – This HPA Module is a high gain, wide dynamic range amplifier module. Custom design available.

GaN Power Amp Pallet RTP18050-10
Product Features
• Solid-state linear design
• Small and light weight
• Suitable for US-PCS
• 50 Ohm Input/Output impedance
• High reliability and ruggedness
• Built in Output Isolator
• Built in monitoring circuit
• High efficiency
Application
LTE, GSM RRH
WCDMA RRH
Description
This HPA Module is a high gain, wide dynamic range amplifier module.
Custom design available.
Electrical Specifications @ VDD=+31DC, 50Ω System
Parameter
Symbol
SPECIFICATION @ 25℃
Operating Frequency Range BW
1805MHz ~ 1880MHz
Operating Bandwidth within BW
Operating Temperature
OBW Optimized for Multi Mode Signal (LTE+GSM) of 75MHz BW Signal
To
-40℃ ~ +65℃ @ Chamber Temperature
Operating Voltage
Average Output Power
VDC
Pout
V_DD(Main/Drive Amp) : +31Vdc , +5.6Vdc
47.2dBm(52.5W) Avg. @ 75MHz, Multi-Mode Signal
Peak Output Power
Psat
Gain @ 25℃
G
54.8dBm (Min.)@ Pulse Duty 10%
57.0dB (Min.)
Gain Flatness
ΔG
within 3.0dB over Operating Frequency Range
Gain Variation with Temperature GV
±3dB
Input Return Loss
S11
-12dB (Max.)
Output Return Loss
S22
-17dB (Max.)
Current Consumption
ACLR
ACPR (LTE 1FA 10MHZ)
@ Po=+47.2dBm (max.)
GSM Multi Carrier IMD
(PAPR 7.5dB)
Efficiency
Coupling Port Output
Temp Detector
IDD
ACLR
ACLR
IMD
Eff
FB
T
IDD : +31Vdc : 4.3A (Typ.) & +5.6Vdc : 360mA(Tpy.)
75MHz RB @ ±75MHz offset
Max -27dBc @ 25℃
Non-DPD
With-DPD
-27dBc(Min) @±10MHz
-53dBc(Min) @±10MHz
@-30 ~ +65°C
@ 31V
@ CFR 7.5dB
Non DPD
With DPD
-25dBc(Min.)
-55dBc(Min.)
@-30 ~ +65°C
@ 31V
@ CFR 7.5dB
40%(Typ.)
Power of 47.2dBm
Average Output
10dBm ± 1.5dB
0.90V @ 40℃
▪ Tel : [phone]
▪ [e-mail]
▪ All specifications may change without notice.
▪ Version 1.0