RTP08016-10 Datasheet, PDF (1/6 Pages) RFHIC – The RTP08016-10 is designed for RF system application frequencies from 860MHz to 890MHz, with high gain.

Preliminary
Power Amplifier Pallet
RTP08016-10
Product Features
• Doherty amplifier design
• Small and light weight
• 50 Ohm Input/ Output impedance matched
• Highly reliable and rugged design
• High efficiency, High Gain
• 16W typical P_AVG
Application
•CDMA,W-CDMA Repeater
Description
The RTP08016-10 is designed for RF system application frequencies from 860MHz to 890MHz, with high gain. This Pallet
Amplifier uses GaN on Sic HEMT technology which performs high breakdown voltage, high linearity, and high efficiency.
The RTP08016-10 is a CDMA W-CDMA DPD application amplifier
Electrical Specifications
Parameter
Operating Frequency Range
Technologies Supported
Instantaneous Bandwidth
Operating Temperature
Operating Voltage
Gain (25℃)
Gain Flatness
Input/Output Return Loss
Current Consumption
Output Power
Specification @ 25℃
860-890
CDMA, WCDMA
30MHz
-10℃ ~ +80℃ @ Plate Temperature
Main voltage
45.0±1.0
Sub voltage
5.6±0.2
40±3.0
< 1.5
> 18.0
Main current
<1.0 max
Sub current
< 0.1 max
42
MHz
deg ℃
V
dB
dBp-p.
dB
A
A
dBm
Spectrum Mask (ACLR)
Pre DPD
< -25@ ∆5MHz
dBc
* Input Signal: Better than -58dBc
Post DPD
< -45@ ∆5MHz
dBc
Saturation Power
> 49.5
dBm
CCDF
7.5
dB
Efficiency
> 35.5 @ Plate Temperature
%
Coupling Value
0.7±1.0
dB
Gain Flatness for feedback
< 0.3
dBp-p.
Note : Channel Bandwidth: 30 MHz(WCDMA 6FA), PAR ⇒ about 7.5 dB @ considering DPD
▪ Tel : [phone]
▪ [e-mail]
▪ All specifications may change without notice.
▪ Version 1.0