RFP-2140-39-27N Datasheet, PDF (1/5 Pages) RFHIC – HPA Module

HPA Module
Product Features
• Solid-state linear design
• Small and light weight
• Suitable for UMTS
• 50 Ohm Input/Output impedance
• High reliability and ruggedness
• Built in Output Isolator
• Built in monitoring circuit
• High efficiency
RFP-2140-39-27N
Application
• UMTS Repeater
Description
This HPA Module is a high gain, wide dynamic range amplifier module.
It has superior performance comes with a modest price tag.
Custom design available.
Electrical Specifications @ VDD=+27VDC, T=25°C, 50Ω System
PARAMETER
Symbol
Specification
Frequency Range
Output Power
SPECTRUM EMISSION MASK
(WCDMA 4CARRIERS)
BW
P
SEM
2130 ~ 2150MHz
39dBm/4FA Average max.
PER 3GPP TS-25.141 @+39dBm
(WCDMA 2FA)
ACLR (WCDMA 4 CARRIERS)
@ Po=+39dBm max.
ACLR
< -51dBc @± 5MHz
< -53dBc @±10MHz
@ +26V ~ +28V
@ +25°C
RF Gain
Gain Variation Over Dynamic Range
Normal Operating Voltage
Gain Flatness
G
ΔG_TEMP
VDC
ΔG
Input Return Loss
Harmonics (2nd)
S11/S22
H
Current Consumption
IDD
Operating Temperature
To
Over power Alarm
OPA
Input Power ALC
ALC
Detect Accuracy
EVM
EVM
50dB ±1dB @frequency range, +27V, -20 ~ +70°C
±1.0dB max. @ Po=+20dBm~+39dBm(△Pin:-20dB), 27V, +25℃
+27V ±1V
Peak to peak 1.0 dB Over operating frequency
Peak to peak 0.2 dB Over any 3.84MHz
-18dB min.
-50dBc (min)
3.5A max. @+27V, +25℃, Po=+39dBm
4A max. @+27V, +25℃, Po=ALC point
-20℃ ~ + 70℃ (Case temp)
41.5dBm±0.5dB
Operating point
41.5dBm ± 0.5dB
Operating range
15dB. Accuracy ±0.5dB
±0.5dB
Po=+21dBm~+42dBm
±1dB
Po=+0dBm~+10dBm
less 2%
▪ Tel : [phone]
▪ [e-mail]
▪ All specifications may change without notice.
▪ Version 1.0