LCL0402-L_14 Datasheet, PDF (1/4 Pages) RFHIC – Multichip Hybrid Module

MCM LNA
LCL0402-L / LCL0902-L
LCL1502-L
Product Features
• Multichip Hybrid Module
• GaAs p-HEMT & MESFET chip on board
• No matching circuit needed
• High IP3 & Low Noise
• Single Supply Voltage (+5V)
• Surface Mount Hybrid Type
• Tape & Reel Packaging
• Small Size, High Heatsink
• Alumina Substrate
• Pb Free / RoHS Standard
Applications
• 2G & 3G Repeater
• Base Station
• PCS, CDMA, W-CDMA
• GSM, DCS, UMTS
• WiMAX, Wibro, WLAN
• RF Sub-Systems
Package Type : CP-16B
Description
RFHIC’s LOW Noise Amplifier series are all hybrid LNA type products which includes all matching for the convenience of customers.
LCL series are focused on higher OIP3 while maintaining low noise. The structure of the device is built with GaAs p-HEMT die
attached on a ceramic thick film substrate. The device is still smaller than the area one would use for the application notes all together.
Depending on the part number, one can use this in different frequency applications. All LNA hybrids are possible to have custom
frequency & spec without any additional NRE cost involved.
All RFHIC products are RoHS compliant.
Electrical Specifications
PARAMETER
UNIT LCL0402-L
LCL0902-L
Frequency Range
MHz
380 ~ 520
824 ~ 894
(Cellular)
890 ~ 960
(GSM)
Small Signal Gain (S₂₁)
dB
33.5
33.5
33
Gain Flatness
dB
±0.5
±0.5
±0.5
Input Return Loss (S₁₁)
dB
-15
-15
-15
Output Return Loss (S₂₂)
dB
-13
-13
-13
1dB Compression Point (P₁dB)
dBm
21
21
21
Output 3^rd Order Intercept Point
dBm
40
36
36
(OIP3) (TYP.)
Noise Figure (TYP.)
dB
1.2
0.9
0.8
DC Supply
Current (Vdc=+5V)
mA
150 ~ 190
150 ~ 190
Test Condition
① Supply voltage = +5V, 50ohm System, Ta = 25℃
② OIP3 is measured with two tones, at an output power of +10dBm/tone separated by 1MHz.
150 ~ 190
LCL1502-L
1300 ~ 1850
28
±0.5
-15
-13
21
35
0.8
150 ~ 190
Korean Facilities : 82-31-250-5078 / [e-mail]
US Facility : 919-677-8780 / [e-mail]
1/4
All specifications may change without notice
Version 6.2