CL0901_14 Datasheet, PDF (1/9 Pages) RFHIC – Low Noise Amplifier

Low Noise Amplifier
Product Features
• GaAs p-HEMT chip on board
• No matching circuit needed
• High Maximum input power(+25dBm)
• High IP3 & Low Noise
• Single Supply Voltage (+5V)
• Surface Mount Hybrid Type
• Tape & Reel Packaging
• Small Size, High Heatsink
• Alumina Substrate
• Pb Free / RoHS Standard
CL0901-L / CL1501-L
CL1801-L / CL2101-L
Applications
• 2G & 3G Repeater
• Base Station
• PCS, CDMA, W-CDMA
• GSM, DCS, UMTS
• WiMAX, Wibro, WLAN
• RF Sub-Systems
Package Type : CP-16A
Description
RFHIC’s LOW Noise Amplifier series are all hybrid LNA type products which includes all matching for the convenience of customers.
CL series are focused on giving lowest noise possible. The structure of the device is built with GaAs p-HEMT die attached on a
ceramic thick film substrate. The device is still smaller than the area one would use for the application notes all together. Depending on
the part number, one can use this in different frequency applications. All LNA hybrids are possible to have custom frequency & spec
without any additional NRE cost involved.
All RFHIC products are RoHS compliant.
Electrical Specifications
PARAMETER
UNIT
CL0901-L
Frequency Range
MHz
824 ~ 894
(Cellular)
890 ~ 960
(GSM)
Small Signal Gain (S₂₁)
dB
19
18
Gain Flatness
dB
±0.5
±0.5
Input Return Loss (S₁₁)
dB
-18
-18
Output Return Loss (S₂₂)
dB
-10
-10
1dB Compression Point (P₁dB)
dBm
14
14
Output 3^rd Order Intercept Point
dBm
27
27
(OIP3) (TYP.)
Noise Figure (TYP.)
dB
0.5
0.5
DC Supply
mA
65
65
Current (Vdc=+5V)
Test Condition
① Supply voltage = +5V, 50ohm System, Ta = 25℃
② OIP3 is measured with two tones, at an output power of +0dBm/tone separated by 1MHz.
CL1501-L
1400 ~ 1600
16
±0.5
-18
-10
15
27
0.7
45
CL1801-L
1700 ~ 2000
15.5
±0.5
-18
-10
16
27
0.6
45
CL2101-L
1850 ~ 2200
14
±1.0
-18
-10
16
27
0.7
45
Korean Facilities : 82-31-250-5078 / [e-mail]
US Facility : 919-677-8780 / [e-mail]
1/9
All specifications may change without notice
Version 6.3