AE514 Datasheet, PDF (1/5 Pages) RFHIC – E-pHEMT MMIC

AE514
E-pHEMT MMIC (Preliminary)
Product Features
0B
• Small size
• Higher Gain
• Higher linearity
• SOIC-8 SMD Type package
• Higher productivity
• Lower manufacturing cost
• -70dBc CSO 79 Channels @ +39dBmV/ch
• -63dBc CTB 79 Channels @ +39dBmV/ch
• -56dBc XMD 79 Channels @ +39dBmV/ch
• Low Noise Figure
Application
1B
• Low Noise Amplifier for
CATV, Satellite
• Cable Modem
• FTTH (G-PON, GE-PON)
• Optical node
Package : SOIC-8
Description
2B
AE514 is designed as low cost drive amplifiers for many applications including FTTH, CATV System.
This MMIC is based on Gallium Arsenide Enhancement Mode pHEMT which shows low current draw and very low noise.
The data in this spec sheet is valid only for 75 ohm application. 50 ohm data is in a separate spec sheet.
Specifications
3B
PARAMETER
4B
Frequency
Gain
Flatness
Input Return Loss
Output Return Loss
Output IP3
1dB Compression Point
Noise Figure
CSO
CTB
30 ~ 870MHz
XMOD
CSO
CTB
30 ~ 870MHz
XMOD
DC Current
UNIT
MHz
dB
dB
dB
dB
dBm
dBm
dB
dBc
dBc
dBc
dBc
dBc
dBc
mA
MIN
16
-8
-8
37
22
TYP
50 ~ 2150
18
1
-20
-20
40
25
2.5
-70
-63
-56
-65
-66
-58
205
MAX
4
-65
-58
-51
-60
-60
-53
Condition
At 500MHz/10dBm 2tone
At 500MHz
79 channel, +39dBmV/ch
135 channel, +37dBmV/ch
Vdd = 5.0V
NOTE
1. Test conditions unless otherwise noted. Test Freq = 500MHz, T=25℃, Vdd=5V, 75Ω system
2. OIP3 measured with 2 tones at an output power of +10dBm/tone separated by 1MHz, Test Freq = 500MHz
Absolute Minimum and Maximum Ratings
PARAMETER
5B
UNIT
MIN
TYP
Device Voltage
VDC
+5
Operating Temperature
℃
-40
Storage Temperature
℃
-40
MAX
+5.5
+85
+150
▪ Tel : [phone]
▪ [e-mail]
▪ All specifications may change without notice.
▪ Version 0.2