AE364 Datasheet, PDF (1/6 Pages) RFHIC – E-pHEMT MMIC

E-pHEMT MMIC
Product Features
• 50 ~ 6000MHz
• GaAs E-pHEMT MMIC
• Higher linearity
• Low Noise Figure
• High Max input power
• SOT-89 SMD Type package
• Higher productivity
• Lower manufacturing cost
• Pb Free / RoHS Standard
AE364
(Preliminary)
Application
• Cellular, GSM
• PCS, W-CDMA
• Wibro, WiMax
Package : SOT-89
Description
AE364 is a drive or pre-drive amplifier designed in a low cost SOT-89 package.
This MMIC is based on Gallium Arsenide Enhancement Mode pHEMT which shows low current and high IP3.
It is designed as driver devices for infrastructure equipment in the 50~6000MHz Wireless technologies such as Cellular, GSM,
PCS, W-CDMA, Wibro, WiMax System.
The data in this spec sheet is valid only for 50 ohm application.
Specifications
PARAMETER
UNIT
MIN
TYP
Frequency Range
MHz
50 ~ 6000
Gain
dB
14.3
Input Return Loss
dB
-18
Output Return Loss
dB
-18
Output IP3
dBm
32
35
1dB Compression Point
dBm
20
23
W-CDMA Power (4FA)
dBm
11
Noise Figure
dB
1.8
DC Current
mA
75
Supply Voltage
V
5
NOTE
1. Test conditions unless otherwise noted. Freq=1900~2200MHz, Vdd=+5V, Ta=25℃, 50Ω system
2. OIP3 measured with 2 tones at an output power of +10dBm/tone separated by 1MHz
3. Test Model 1, 64DPCH, 3.84MHz BW, @±5MHz and ±10MHz offset
MAX
2.3
Remark
Absolute Minimum and Maximum Ratings
PARAMETER
UNIT
MIN
TYP
MAX
Device Voltage
V
+5
+6
Operating Temperature
Storage Temperature
℃
-40
℃
-40
+85
+150
▪ Tel : [phone]
▪ [e-mail]
▪ All specifications may change without notice.
▪ Version 0.3