AE314 Datasheet, PDF (1/7 Pages) RFHIC – E-pHEMT MMIC

E-pHEMT MMIC
AE314
(Preliminary)
Product Features
0B
• Low Noise Figure
• Higher Gain
• Higher linearity
• SOT89 SMD Type package
• Higher productivity
• Lower manufacturing cost
• -64dBc CSO 135 Channels @ +20dBmV/ch
• -74dBc CTB 135 Channels @ +20dBmV/ch
• -82dBc XMD 135 Channels @ +20dBmV/ch
• Pb-free/RoHS compliant
Application
1B
• Low Noise Amplifier for
CATV, Satellite
• Cable Modem
• FTTH (G-PON, GE-PON)
• Optical node
Package : SOT-89
Description
2B
AE314 is designed as low cost drive amplifiers for many applications including FTTH, CATV System.
This MMIC is based on Gallium Arsenide Enhancement Mode pHEMT which shows low current draw and very low noise.
The data in this spec sheet is valid only for 75 ohm application.
◎ Specifications (50MHz~2200MHz)
3B
PARAMETER
4B
Frequency
Gain
Gain Flatness
Input Return Loss
Output Return Loss
Output IP3
1dB Compression Point
Noise Figure
CSO
CTB
30 ~ 870MHz
XMOD
DC Current
UNIT
MHz
dB
dB
dB
dBm
dBm
dB
dBc
dBc
dBc
mA
MIN
33
19
TYP
50 ~ 2200
21.3
19.2
2.5
-8
-8
36
22
2
-64
-74
-82
100
MAX
-4.3
-3.5
3
Condition
At 500MHz
At 2000MHz
At 1000MHz/+10dBm 2tone
At 1000MHz
135 channel, +20dBmV/ch
135 channel, +20dBmV/ch
135 channel, +20dBmV/ch
Vdd = 5.0V
NOTE
1. Test conditions unless otherwise noted. Ta=25℃, Vdd=+5V, 75Ω system
2. OIP3 measured with 2 tones at an output power of +10dBm/tone separated by 1MHz, Test Freq = 1000MHz
Absolute Minimum and Maximum Ratings
PARAMETER
5B
UNIT
Device Voltage
VDC
Operating Temperature
℃
Storage Temperature
℃
MIN
-40
-40
TYP
+5
MAX
+5.5
+85
+150
▪ Tel : [phone]
▪ [e-mail]
▪ All specifications may change without notice.
▪ Version 0.3