VGA101M0JTR063057 Datasheet, PDF (1/2 Pages) RFE international – ALUMINUM ELECTROLYTIC CAPACITORS VGA Series: SMT, 105C Extended Range

ALUMINUM ELECTROLYTIC CAPACITORS
VGA Series: SMT, 105°C Extended Range
FEATURES
•105°C, 2000 hours assured
•RoHS Compliant
•Voltages up to 450 vdc
SPECIFICATIONS
Item
Operating Temp. Range
Capacitance Tolerance
Performance
-40°C ~ + 105°C
± 20% (120Hz, 20°C)
Leakage Current (at 20•C)
4 ~ 10 Ø
6.3 ~ 100V
12.5 ~ 16 Ø
I=0.01CV or 3µA, whichever is greater, after 2 minutes at +20°C
I=0.03CV or 4µA, whichever is greater, after 1 minute at +20°C
160 ~ 450V 12.5 ~ 16 Ø ^{I=0.04CV +100µA after 1 minute at +20°C}
Where I=Leakage Current C=Rated Capacitance in µF V=Rated DC working voltage V
Dissipation Factor
Tan at 120 Hz, 20°C
Rated Voltage
4 ~ 10 Ø
6.3
10
16
25
35
50
63 100 160~250 400~450
0.45
0.35 0.28 0.18 0.16 0.14 0.12 0.12
-
-
12.5 ~ 16 Ø
0.40
0.38 0.34 0.26 0.22 0.18 0.14 0.10
0.20
0.25
Low Temperature
Characteristics (at 120Hz)
Rated Voltage
6.3 10 16 25 35 50 63 100 160-250 400-450
4 ~ 10ö 4 3 2 2 2 2 2 3
-
-
Z(-25°C)/Z(+20°C)
Impedance
12.5 ~ 16ö ₅ 4 3 2 2 2 2 2
3
6
Ratio
4 ~ 10ö 12 8 6 3 3 3 3 4
-
-
Z(-40°C)/Z(+20°C)
12.5 ~ 16ö 10 8 6 _{3 3 3 3 3}
6
10
Life Test
Voltage
Test Time
Load Life
2000 Hrs
Shelf Life
1000 Hrs
Capacitance Change
Within ± 20% of initial value
Within ± 20% of initial value
Standards
Dissipation Factor
Leakage Current
Test Conditions
Less than 200% of specified value
Less than 200% of specified value
Within specified value
Within specified value
The above specifications shall be satisfied when the capacitors are restored to 20 after the
rated voltage applied with rated ripple current for 2000 hrs
JIS C 5101-18-1
PAD SPACING AND DIAMETER
Unit: mm
D
L
A
B
C
W
P+0.2
4 5.7+0.3 4.3 4.3 2.0 0.5 to 0.8 1.0
5 5.7+0.3 5.3
6.3 5.7+0.3 6.6
5.3 ^{2.3 0.5 to 0.8 1.5}
6.6 ^{2.7 0.5 to 0.8} 2.0
6.3 7.7+0.3 6.6 6.6 ^2.7 0.5 to 0.8 2.0
8 10+0.3 8.4 8.4 ^3.0 0.7 to 1.1 3.1
10 10+0.3 10.4 10.4 ^3.3 0.7 to 1.1 4.7
12.5 13.5+0.3 12.8 12.8 ^4.9 1.1 to 1.4 4.6
12.5 16+0.3 12.8 12.8 ^4.9 1.1 to 1.4 4.6
16 16.5+0.3 16.3 16.3 ^{5.8 1.8 to 2.2} 6.0
B
+
-
LW
A
C PC
Note 1-Diameters of 12.5mm & 16mm diameter is 0.4mm Max
PART NUMBER EXAMPLE VGA 101 M 0J TR 063 057
RFE International • Tel:[phone] • Fax:[phone] • E-Mail [e-mail]
C1CB13
REV 2006.1.18