TG470M1ATR050120 Datasheet, PDF (1/2 Pages) RFE international – ALUMINUM ELECTROLYTIC CAPACITORS TG Series: Axial High Temperature

ALUMINUM ELECTROLYTIC CAPACITORS
TG Series: Axial High Temperature
FEATURES
•105°C, 1000 hours assured.
•Excellent temperature performance.
SPECIFICATIONS
Item
Performance
Operating Temperature
6.3 ~ 250V
350V ~ 450V
Range
-40°C ~ + 105°C
-25°C ~ + 105°C
Capacitance Tolerance
± 20% (120Hz, 20°C)
Rated Voltage
100V
>100V
Time
after 2 minutes
After 5 minutes
Leakage Current (at 20°C)
Leakage Current
I = 0.02CV or 3 ( A)
Whichever is greater
CV 100
I = 0.03CV +15 ( A)
CV >1000
I = 0.02CV +25 ( A)
When C= rated capacitance in F. V = rated DC woring voltage in V.
Dissipaton Factor
Rated Voltage 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450
Tan at 120 Hz, 20°C
Tan (max) _{0.23 0.20 0.17 0.15 0.12 0.10 0.09 0.08 0.12 0.14 0.17 0.20 0.25 0.25}
When the capacitance exceed 1000 F 0.02 shall be added every 1000 F increase.
Impedance ratio shall not exceed the values given in the table below
Low Temperature
Characteristics
(at 120Hz)
Load Life Test at 20°C
(after rated voltage
applied for 1000 hours
at 105°C)
Ripple Current &
Frequency Multilpiers
Standards
Rated Voltage
6.3 10 16 25 35 50 63 100 160 200 250 350 400 450
Z(-25°C) ^D<16 4
3
3
22
2
22
3
6 8 12 14 16
Impedance /Z(+20°C) ^D>16 6
4
4 33 3
33
Ratio Z(-40°C) ^D<16 8
6
6
/Z(+20°C) ^D>16 12 10 8
44 3
88 8
33
4
66
8 10
Test Time
1000 Hrs
Shelf Life Test at 20°C
Test Time
1000 Hrs
Capacitance Change
< ± 20%
(after rated voltage
Capacitance Change
20%
Dissipation Factor Less than 200% of specified value. applied for 1000 hours
Dissipation Factor Less than 200% of specified value
Leakage Current
Within specified value
without voltage applied) Leakage 6.3 ~ 100V
Within specified value
Current 160 ~ 450V Less than 200% of specified value
Freq. (Hz)
10K
60 120 500 1K
Riple Current &
Temperature (°C) Under 50 70 85 105
Cap. ( F)
up Temperature Multipliers Multipliers
1.95 1.78 1.40 1.00
Under 100
0.70 1.00 1.30 1.40 1.50
220 to 1000
0.75 1.00 1.20 1.30 1.35
2200 up above 0.80 1.00 1.10 1.12 1.15
Satisfies Characteristic W of JIS C 5141
LEAD SPACING AND DIAMETER
D5
d
6.3 8
0.6
1.5
0.5
10 13 16 18 22 25
0.8
1.0
2.0
1.0
DIAGRAM
PART NUMBER EXAMPLE
TG 470 M 1A TR 050 120
RFE International • Tel:[phone] • Fax:[phone] • E-Mail [e-mail]
C1CG02
REV 2001