SG0R1M1HSA040070 Datasheet, PDF (1/1 Pages) RFE international – ALUMINUM ELECTROLYTIC CAPACITORS SG Series: Radial, Miniature, High Temperature Range, 105C

ALUMINUM ELECTROLYTIC CAPACITORS
SG Series: Radial, Miniature, High Temperature Range, 105°C
FEATURES
•105°C, 1000 hours assured.
• High temperature range, with 7mm height.
SPECIFICATIONS
Item
Performance
Operating Temperature Range
-40° ~ + 105°C
Capacitance Tolerance
± 20% (120Hz, 20°C)
Leakage Current (at 20°C)
I = 0.01CV or 0.3 ( A) whichever is greater (after 2 minutes)
Where, C = rated capacitance in F. V=rated DC working voltage in V.
Dissipaton Factor
Tan at 120 Hz, 20°C
Rated Voltage 4 6.3 10 16 25 35 50 63
Tan (max) 0.35 0.25 0.20 0.17 0.15 0.13 0.10 0.10
Low Temperature
Characteristics (at 120Hz)
Rated Voltage
4 6.3 10 16 25 35 50 63
Z(-25°C) /Z(+20°C) 7
Impedance Ratio
6
4
3
2
2
2
Impedance ratio shall not exceed
2
the values given in the table.
Z(-40°C) /Z(+20°C) 15 _{12 8}
6
4
4
4
4
Load Life Test
Test Time
Capacitance
Change
Dissipation Factor
Leakage Current
1000 Hrs
± 20%
Less than 200% of specifiec value
Within specified values
The specification shall be satisfied
when the capacitors are restored to 20°C after
rated voltage applied for 1000hrs at 105°C.
Shelf Life Test
Test Time
Capacitance
Change
Dissipation Factor
1000 Hrs
± 20%
Less than 200% of specifiec value
The specification shall be satisfied when
the capacitors are restored to 20°C after exposing them
for 1000 hrs at 105°C without voltage applied.
Leakage Current
Within specified values
Ripple Current &
Frequency Multipliers
Freq. (Hz)
60 (50) 120
500
1K
10K up
Cap. (mF)
Under 33
0.75
1.00
1.20
1.30
1.45
47 to 220
0.80
1.00
1.10
1.15
1.20
Ripple Current &
Temperature Mutipliers
Temperature (°C) Under 50 ⁷⁰
85
105
Multipliers
1.95
1.65
1.27
1.0
Standards
Satisfies Characteristic W of JIS C 5141
DIMENSIONS & PERMISSABLE RIPPLE CURRENT
Dimension: D×L(mm); Ripple Current: mA/RMS at 120Hz 105°C
mF
0.10
0.22
0.33
0.47
1
2.2
3.3
4.7
10
22
33
47
100
220
330
VDC 4V (0G)
Code fD x L mA
0R1
R22
R33
R47
010
2R2
3R3
6.3V (0J)
fD x L mA
4R7
100
220
4 x 7 31
330 4 x 7 32 4 x 7 32
4 x 7 39
470
4x7
38
5x7
47
101 5 x 7 61 ^{6.3 x 7 75}
5 x 7 63
221 6.3 x 7 90 6.3 x 7 99
331 8 x 7 156 8 x 7 156
10V (1A)
16V (1C)
fD x L mA fD x L mA
4 x 7 25
4 x 7 33
4 x 7 32 _{5 x 7 39}
4 x 7 35 5 x 7 43
6.3 x 7 49 _{6.3 x 7 65}
5 x 7 59
6.3 x 7 80 6.3 x 7 90
8 x 7 140 8 x 7 146
25V (1E)
35V (1V)
fD x L mA fD x L mA
4 x 7 22 4 x 7 22
4 x 7 26 ^{4 x 7 26}
5 x 7 30
4 x 7 34
5 x 7 41 ^{6.3 x 7 47}
6.3 x 7 60
6.3 x 7 53 _{8 x 7 71}
8 x 7 83 8 x 7 85
6.3 x 7 125
50V (1H)
63V (1J)
fD x L mA fD x L mA
4x7 2 4x7 2
4x7 3 4x7 3
4 x 7 4 4 x 7 4.4
4 x 7 5 4 x 7 7.9
4 x 7 10 4 x 7 11
4 x 7 15 4 x 7 17
4 x 7 18 4 x 7 21
4x7
5x7
22
23
5 x 7 26
5 x 7 31
6.3 x 7 34 ^{6.3 x 7 40}
6.3 x 7 53 8 x 7 70
8 x 7 76
LEAD SPACING AND DIAMETER
fD 4
5 6.3 8
P 1.5 2.0 2.5 3.5
fd 0.45
0.5
a
1.0
b
0.5
PART NUMBER EXAMPLE
SG 0R1 M 1H SA 040 070
RFE International • Tel:[phone] • Fax:[phone] • E-Mail [e-mail]
C1CE02
REV 2004.8.23