RGA221M1HBK100200 Datasheet, PDF (1/3 Pages) RFE international – ALUMINUM ELECTROLYTIC CAPACITORS RGA Series: Radial High Temperature, 105C

ALUMINUM ELECTROLYTIC CAPACITORS
RoHS
RGA Series: Radial High Temperature, 105°C ü
FEATURES
•High Temperature, 105°C.
•For general purpose
•Replaces RG & RHG Series.
SPECIFICATIONS
Items
Life
Operating Temp.
Capacitance Tolerance
Leakage Current
(at 20 °C)
Rated Voltage
Time
Leakage Current
Performance
at 105 °C 2000 Hours
-40 °C ~ +105 °C
+20% (at 120Hz, 20 °C)
< 100V
> 100V
after 2 minutes
after 5 minutes
I = 0.01CV or 3 (µA)
CV < 1000
CV > 1000
whichever is greater
I = 0.03CV+15 (µA)
I = 0.02CV+25 (µA)
Where C = rated capacitance in µF. V = rated DC working voltage in V.
Dissipation Factor
Rated Voltage
6.3 10 16 25 35 50 63 100 160 200 250 350 400 450
(Tan ä at 120Hz, 20°C)
Tan ä (max)
0.23 0.20 0.16 0.14 0.12 0.10 0.09 0.08 0.12 0.14 0.17 0.20 0.25 0.25
When the capacitance exceeds 1,000 µF, 0.02 shall be the added every 1,000 µF increase.
Impedance ratio shall not exceed the values given in the table below.
Low Temperature
Characteristics
(at 120Hz)
Rated Voltage
Z (-25°C) / Z (+20 °C)
Impedance
Ratio
Z (-40°C) / Z (+20°C)
D < 16
D > 16
D < 16
D > 16
6.3 10 16 25 35 50 63 100 160 200 250 350
4
3322222
3 6 8 12
6
4433333
8
6644333
4 8 10 16
12 10 8 8 8 8 6 6
Test Time
2,000 hrs
Capacitance Change
Within + 20% of initial value
Load Life Test
Dissipation Factor
Leakage Current
Less than 200% of specified value
Within specified value
* The above specifications shall be satisfied when the capacitors are restored to 20 °C after
the rated voltage applied with rated ripple current for 2,000 hrs at 105 °C.
Test Time
1,000 hours
Capacitance Change
Within + 20% of initial value
Shelf Life Test
Dissipation Factor
Leakage Current
Less than 200% of specified value
Within specified value
400 450
14 16
18 20
* The above specifications shall be satisfied when the capacitors are restored to 20 °C after exposing them for 1,000 hrs at 105 °C without voltage applied. The
rated voltage shall be applied to the capacitors before the measurements for 160 ~ 450V (Refer to JIS C 5101-4 4.1).
Ripple Current &
Frequency Multipliers
Other Standards
Cap. (µF)
Freq. (Hz)
60 120 500 1k 10k up
Under 100
0.70 1.00 1.30 1.40 1.50
100 < C < 1,000 0.75 1.00 1.20 1.30 1.35
1,000 up above 0.80 1.00 1.10 1.12 1.15
JIS C 5101-4
LEAD SPACING AND DIAMETER
j D 5 6.3 8 10 12.5 16 18 22 25
P 2.0 2.5 3.5 5.0 5 7.5 7.5 10 12.5
jd
0.5
0.6
0.8
1.0
a
1.0
1.5
2.0
b
0.5
PART NUMBER EXAMPLE
RGA 221 M 1H BK 100 200
RFE International • Tel:[phone] • Fax:[phone] • E-Mail [e-mail]
C1CC02
REV 2009.7.24