P4KE12AR Datasheet, PDF (1/1 Pages) RFE international – TRANSIENT VOLTAGE SUPPRESSOR DIODE P4KE, SA, P6KE, 1.5KE, 5KP; 400W to 5000W PPK

TRANSIENT VOLTAGE SUPPRESSOR DIODE
P4KE, SA, P6KE, 1.5KE, 5KP; 400W to 5000W P_PK
FEATURES
• Epoxy: UL 94V-0 rated flame retardant
• Excellent clamping capability
• Low zener impedance
• Fast response time, typically less than 1ps
from 0 volts to BV min
• Typical IR less than 1 uA above 10V
• High temperature soldering guarantied:
250°C/10 sec./.375", (9.5mm) lead
length/5lbs., (2.3kg) tension
DIAGRAM
B
A
MECHANICAL DATA
• Case: Molded plastic
• Terminals: Axial Leads, solderable per
MIL-STD-202, method 208
• Polarity: color band denotes cathode
except bipolar
E
D
C
DIMENSIONS
Series Package
A
B
C
D
E
Code
Max Min Min Max Min Max Min Max Min
P4KE DO-41 in 0.205 0.166 1.00 2.205 2.166 0.107 0.080 0.340 0.028
mm 5.2 4.2 24.4 54.0 53.0 2.7 2.0 0.9 0.7
P6KE DO-15 in 0.300 0.230 1.00 2.300 2.230 0.140 0.104 0.034 0.028
SA
mm 7.6 5.8 25.4 58.4 56.6 3.6 2.6 0.9 0.7
1.5KE DO-201 in 0.375 0.285 1.00 2.375 2.285 0.220 0.197 0.042 0.038
mm 9.5 7.2 25.4 60.3 58.0 5.6 5.0 1.1 1.0
5KP P-600 in 0.36 0.34 1.00 2.36 2.34 0.360 0.340 0.052 0.048
mm 9.1 8.5 25.4 59.9 59.3 9.1 8.6 1.3 1.2
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25°C ambient temperature unless otherwise specified. Single Phase, Half wave, 60Hz, resistive or
inductive load. For capacitive load, derate current by 20%.
Specification
Peak Power Dissipation at T_A=25°C, T _P=1ms *
Steady State Power Dissipation at T _L=75°C
Lead Lengths .375", 9.5mm **
Peak Forward Surge Current, 8.3ms single
half sine-wave superimposed on rated load
(JEDEC method)***
Operating and Storage Temperature Range
Symbol
P_PK
P_D
P4KE
400 min
1.0
I_FSM
40.0
SA
500 min
1.0
70.0
Value
P6KE
600 min
5.0
1.5KE
1500 min
5.0
Units
5KP
5000 min Watts
8.0 Watts
100.0
200.0
400.0 Amps
T_j, T_STG -65 to +150 -55 to +175 -65 to +150 -65 to +150 -55 to +175 °C
* Non-repetitive current pulse per fig. 3 and derated above T_A=25°C per fig 2.
** Mounted on Copper Leaf area of 1.57 in²., (40mm²)
*** 8.3ms single half sine-wave, duty cycle=4 pulses per minute max.
****Add “C” suffix for bipolar types.
HOW TO MAKE A PART NUMBER See charts on pages 34 & 35 for further detail.
P4KE 12A R
1
23
1 - Series Code from Maximum Reverse Current column
2 - Break Down Voltage Code from Break Down Voltage Code column
3 - Packaging
A - Tape & Ammo
R - Tape & Reel
Omit for bulk packaging.
RFE International • Tel:[phone] • Fax:[phone] • E-Mail [e-mail]
C5DC01
REV 2001