LVG101M2G220300 Datasheet, PDF (1/2 Pages) RFE international – ALUMINUM ELECTROLYTIC CAPACITORS LV/LVG Series: Snap-In, High Voltage, Flame Retardant

ALUMINUM ELECTROLYTIC CAPACITORS
RoHS
ü
LV/LVG Series: Snap-In, High Voltage, Flame Retardant
FEATURES
• Has a snap-in terminal which can solder to a PCB directly
• Suitable for electronic equipment with high voltage circuits.
• Printed circuit board terminal snap-in type and lug terminal type available.
• Meets UL 94V-0 Flammability
• RoHS Compliant
SPECIFICATIONS
Items
Operating Temperature Range
Capacitance Tolerance
Leakage Current (at 20 °C)
Dissipation Factor (Tan at 120Hz, 20°C)
Low Temperature Characteristics (at 120Hz)
Load Life Test
Shelf Life Test
Ripple Current & Frequency Multipliers
Ripple Current & Temperature Multipliers
Standards
Rated Voltage (V)
Tan (max)
Rated Voltage (V)
Impedance Ratio
LV
-25 °C ~ +85 °C
+20% (at 120Hz, 20 °C)
Performance
LVG
-25 °C ~ +105°C
+20% (at 120Hz, 20°C)
û ^{1=3 CV or 1.5 mA whichever is smaller (after 5 minutes)}
Where C=rated capacitance in µF
V=rated DC working voltage in V
400
450
400
450
0.15
0.25
0.25
0.25
Impedance ratio shall not exceed the values given in the table below.
400
450
400
450
Z(-25 °C) / Z(+20 °C)
8
12
12
12
Test Time
2,000 Hrs
Capacitance Change
Within +20% of initial value
Dissipation Factor
Less than 200% of specified value
Leakage Current
Within specified value
* The above specifications shall be satisfied when the capacitors are restored to 20°C after the rated voltage with ripple current
applied for 2,000 hrs at 85 °C / 105 °C.
Test Time
1,000 Hrs
Capacitance Change
Within +20% of initial value
Dissipation Factor
Less than 150% of specified value
Leakage Current
Within specified value
* The above specifications shall be satisfied when the capacitors are restored to 20°C after exposing them for 1,000 hrs at 85 ^°C /
105 °C without voltage applied. The rated voltage shall be applied to the capacitors before the measurements
(Refer to JIS C 5102).
Freq. (Hz)
60
WV
400 ~ 450
0.8
Temperature (°C) 40
Multiplier
1.8
120 500 1k 10k up
1.0 1.05 1.10 1.15
60 70 85 105
1.4 1.2 1.0 1.0
JIS C 5101-4
Temperature (°C)
Multiplier
40 60 70 85 105
2.5 2.2 2.0 1.8 1.0
SNAP-IN TERMINAL TYPE - LV/LVG
PART NUMBER EXAMPLE
LV (G) 101 M 2G 220 300
Blank 6.3mm Terminal
A = 4mm Terminal
a
Case Size (Diameter X Length)mm
a
Rate Voltage (400V)
a
Capacitance tolerance (±20%)
a
Capacitance (100µF)
a
Series name
RFE International • Tel:[phone] • Fax:[phone] • E-Mail [e-mail]
C1CH07
REV 2009.8.3