LSM101M2G220300 Datasheet, PDF (1/3 Pages) RFE international – ALUMINUM ELECTROLYTIC CAPACITORS LSM Series: Snap-in, 105°C

ALUMINUM ELECTROLYTIC CAPACITORS
RoHS
LSM Series: Snap-in, 105°C
ü
FEATURES
• Has a snap-in terminal which can solder to PCB directly and need not fixture to save processing time.
• Suitable for electronic equipment with medium-high voltage circuits. Printed circuit board terminal
snap-in type and lug terminal type available.
• 3,000 Hour Life
SPECIFICATIONS
Item
Operating Temp. Range
Capacitance Tolerance
Leakage Current (at 20°C)
Dissipation Factor
(Tand at 120Hz, 20°C)
Low Temperature
Characteristics (at 120Hz)
Load Life Test
Shelf Life Test
Ripple Current &
Frequency Multipliers
Ripple Current &
Temperature Multipliers
Standards
Performance
-40°C ~ +105°C
±20% (at 120Hz, 20°C)
I=0.02CV or 1.5mA whichever is smaller (after 5 minutes)
Where, C=rated capacitance in mF. V=rated DC working voltage.
Rated Voltage
16 25 35 50 63 100 160 200 250 350 400 450
Tan d (max)
0.40 0.30 0.25 0.20 0.15 0.10* 0.15 0.10* 0.10* 0.15 0.15 0.15
*0.15 for fD = 35mm
Impedance ratio shall not exceed the values given in the table below.
Rated Voltage
16 25 35 50 63 100 160 200 250 350 400 450
Impedance
Ratio
Z(-25°C) / Z(+20°C) 4 3 3 2 2 2 4 4 4 4 8 8
Z(-40°C) / Z(+20°C) 15 10 8 6 6 5 4 8 10 16 18 20
Test Time
3000 hours
Capacitance Change
Within ±20% of initial value
Dissipation Factor
Less than 200% of specified value
Leakage Current
Within specified value
The above specifications shall be satisfied when the capacitors are restored to 20°C
after the rated voltage applied for 3000 hrs at 105°C
Test Time
Capacitance Change
Dissipation Factor
Leakage Current
1000 hours
Within ±20% of initial value
Less than 150% of specified value
Within specified value
The above specifications shall be satisfied when the capacitors are restored to 20°C
after exposing them for 1000 hrs at 105°C without voltage applied.
WV (V) Freq (Hz)
Multiplier
Temperature (°C)
Multiplier
50/60 120 300 1K 10K up
0.8
1.0
1.1
1.3
1.4
40 60 70 85 105
2.5 2.2 2.0 1.8 1.0
Satisfies Characteristics W of JIS C 5141
SNAP-IN TERMINAL TYPE
PART NUMBER EXAMPLE
LSM 101 M 2G 220 300
Blank 6.3mm Terminal
A = 4mm Terminal
a
Case Size (Diameter X Length)mm
a
Rate Voltage (400V)
a
Capacitance tolerance (±20%)
a
Capacitance (100µF)
a
Series name
RFE International • Tel:[phone] • Fax:[phone] • E-Mail [e-mail]
C1CH05
REV 2009.8.3