LSK101M2G220350 Datasheet, PDF (1/2 Pages) RFE international – ALUMINUM ELECTROLYTIC CAPACITORS LSK Series: Snap-In, 105C, 5000 hrs

ALUMINUM ELECTROLYTIC CAPACITORS _RoHS
LSK Series: Snap-In, 105°C, 5000 hrs
ü
FEATURES
• Snap-in, 105°C
• 5,000 hour life
SPECIFICATIONS
Items
Operating Temperature Range
Capacitance Tolerance
Leakage Current (at 20°C)
Performance
-25°C ~ +105°C
+20% (at 120Hz, 20°C)
I = 0.01CV or 3 mA whichever is smaller (after 5 minutes)
Where, C= rated capacitance in µF. V= rated DC working voltage in V.
Dissipation Factor
(Tan at 120Hz, 20°C)
Low Temperature
Characteristics (at 120Hz)
Load Life Test
Shelf Life Test
Ripple Current &
Frequency Multipliers
Other Standards
Rated Voltage 200
250
350 400 450
Tan (max) 0.15
0.15
0.15 0.15 0.15
Impedance ratio shall not exceed the values given in the table below.
Rated Voltage
200 250 350 400
400
Impedance
Z (-25°C)/Z(+20°C)
Ratio
4
448
8
Test Time
5,000 Hrs
Capacitance Change
Within +20% of initial value
Dissipation Factor
Less than 250% of specified value
Leakage Current
Within specified value
* The above specifications shall be satisfied when the capacitors are restored to 20°C after
the rated voltage applied for 5,000 hrs at 105°C
Test Time
1,000 Hrs
Capacitance Change
Within +20% of initial value
Dissipation Factor
Less than 150% of specified value
Leakage Current
Within specified value
* The above specifications shall be satisfied when the capacitors are restored to 20_°C after
exposing them for 1,000 hrs at 105°C without voltage applied. The rated voltage shall be
applied to the capacitors before the measurements (Refer to JIS C 5102)
Freq. (Hz) 50/60
120
10K
300 1K
up
Multiplier 0.8
1.0
1.1 1.3 1.4
JIS C 5101-4
PART NUMBER EXAMPLE
LSK 101 M 2G 220 350
SNAP-IN TERMINAL TYPE
Terminal Lengh:
Blank = 6.3mm
A = 4.0mm
Case Size (22mm X 30mm)
Rated Voltage (400V)
Capacitance tolerance (±20%)
Capacitance (100mF)
Series name
L+2 Max
4.0+5
RFE International • Tel:[phone] • Fax:[phone] • E-Mail [e-mail]
C1CH06
2009.8.3