LSG101M2G220300 Datasheet, PDF (1/3 Pages) RFE international – ALUMINUM ELECTROLYTIC CAPACITORS LSG Series: Snap-in Terminal Type, 105C

ALUMINUM ELECTROLYTIC CAPACITORS
RoHS
LSG Series: Snap-in Terminal Type, 105°C
ü
FEATURES
•Has a snap-in terminal which can solder to a PCB directly and need not fixture to save processing time.
•Suitable for electronic equipment with medium-high voltage circuits.
•Printed circuit board terminal snap-in type and lug terminal type available.
SPECIFICATIONS
Item
Performance
Operating
Temperature Range
-40°C ~ +105°C
Capacitance Tolerance
± 20% (120Hz, 20°C)
Leakage Current
I = 0.02CV ( A after 2 minutes)
(at 20°C)
Where, C = rated capacitance in F. V=rated DC working voltage in V.
Rated Voltage 16
25
35 50 63 100 160 200 250 350 400 450
Dissipaton Factor (Tan ) Tan (max) _{0.40 0.30 0.25 0.20 0.15 0.15 0.10* 0.10* 0.10* 0.15* 0.15 0.15}
0.15 for D = 35mm
Low Temperature
Characteristics
(at 120Hz)
Rated Voltage
16
25
35 50 63 100 160 200 250 350 400 450
Impedance Z(-25°C)/Z(=20°C) 4
3
3
2
2
2
4
4
4
4
8
8
Ratio
Z(-40°C)/Z(=20°C) 15
10
8
6
6
5
4
8
10
16
18
20
Impedance ratio shall not exceed the vaues given in the table above
Load Life Test
Test Time
2000 Hrs
(after application of the
Capacitance Change
Within ± 20% of initial value
rated voltage at
Dissipation Factor
Less than 200% of specifiec value
85°C/105°C, the polarity
Leakage Current
Within specified values
inverted every 250 hours. _{The above specification shall be satisfied when the capacitors are restored to 20°C after rated voltage}
applied for 2000 hrs at 85°C/105°C
Test Time
1000 Hrs
Capacitance Change
Within ± 20% of initial value
Shelf Life Test
Dissipation Factor
Less than 200% of specifiec value
Leakage Current
Within specified values
The above specification shall be satisfied when the capacitors are restored to 20°C after exposing them
Ripple Current &
for 500 hrs at 85°C/105°C without voltage applied.
Freq.(Hz)
60
120
500
1K
W.V.(V)
10K up
Frequency Multipliers
Under 100
0.92 1.00 1.13 1.19 1.20
160 ~ 250
0.81 1.00 1.32 1.45 1.50
350 and up
0.77
1.00
1.30
1.41 1.43
Ripple Current &
Temperature (°C) 55
70
85
105
Temperature Multipliers
Multiplier
2.1
1.8
1.5
1.0
Standards
Satisfies Characteristic W of JIS C 5141
PART NUMBER EXAMPLE
LSG 101 M 2G 220 300
Blank 6.3mm Terminal
A = 4mm Terminal
a
Case Size (Diameter X Length)mm
a
Rate Voltage (400V)
a
Capacitance tolerance (±20%)
a
Capacitance (100µF)
a
Series name
SNAP-IN TERMINAL TYPE
RFE International • Tel:[phone] • Fax:[phone] • E-Mail [e-mail]
C1CH04
REV 2009.8.3