LS101M2G220300 Datasheet, PDF (1/6 Pages) RFE international – ALUMINUM ELECTROLYTIC CAPACITORS LS Series: Snap-In Terminal Types

ALUMINUM ELECTROLYTIC CAPACITORS
RoHS
LS Series: Snap-In Terminal Types
ü
FEATURES
• Has a snap-in terminal which can solder directly to a PCB
• Suitable for electronic equipment with medium-high voltage circuits
• Printed circuit board terminal snap-in type and lug terminal type available
SPECIFICATIONS
Items
Operating Temperature Range
Capacitance Tolerance
Leakage Current (at 20°C)
Performance
-40 °C ~ +85 °C
+20% (at 120Hz, 20 °C)
I = 0.02CV or1.5 mA whichever is smaller (after 5 minutes)
Where, C= rated capacitance in µF. V= rated DC working voltage in V.
Dissipation Factor
(Tan ä at 120Hz, 20°C)
Low Temperature
Characteristics (at 120Hz)
Load Life Test
Shelf Life Test
Ripple Current &
Frequency Multipliers
Ripple Current &
Temperature Multipliers
Other Standards
Rated Voltage 16 25 35 50 63 100 160 200 250 350 400 450
Tan ä (max) 0.40 0.30 0.25 0.20 0.15 0.15 0.1 0.1 0.1 0.15 0.15 0.15
*: 0.15 for Ö D = 35mm
Impedance ratio shall not exceed the values given in the table below.
Rated Voltage
16 25 35 50 63 100 160 200 250 350 400 450
Impedance Z (-25°C)/Z(+20°C) 4
3
3 2 22 4 4 4488
Ratio
Z(-40°C)/Z(+20°C) 15 10
8 6 6 5 4 8 10 16 18 20
Test Time
Capacitance Change
Dissipation Factor
Leakage Current
2,000 Hrs
< + 20%
Less than 200% of specified value
Within specified value
* The specifications shall be satisfied when the
capacitors are restored to 20°C after the rated voltage
applied for 2,000 hrs at 85°C
Test Time
Capacitance Change
Dissipation Factor
Leakage Current
1,000 Hrs
< + 20%
Less than 200% of specified value
Within specified value
* The specification shall be staisfied when the
capacitors are restored to 20°C after exposing them for
2,000 hrs at 85°C
Freq.
(Hz) 60 120 500 1k 10k up
W. V. (V)
Under 100 0.92 1.0 1.13 1.19 1.20
160 and Up 0.81 1.0 1.32 1.45 1.50
350 and Up 0.77 1.0 1.30 1.41 1.43
Temperature
40 55 70
85
(°C)
Multiplier 2.1 1.8 1.5
1.0
Satisfies Characteristic W fo JIS C 5141
PART NUMBER EXAMPLE
LS 101 M 2G 220 300
SNAP-IN TERMINAL TYPE (2 TERMINAL)
Blank = 6.3mm Terminal
A = 4mm Terminal
a
Blank = Standard 2 Terminal
L4 for 4 Terminal Type
a
Case Size (Diameter X Length)mm
a
Rate Voltage (400V)
a
Capacitance tolerance (±20%)
a
Capacitance (100µF)
SNAP-IN TERMINAL (4 TERMINAL)
a
Series name
RFE International • Tel:[phone] • Fax:[phone] • E-Mail [e-mail]
C1CH02
REV 2009.8.3