CI-065-KS1-10K-M Datasheet, PDF (1/1 Pages) RFE international – SEMI-FIXED TRIMMERS CI & LU Series: Cermet & Carbon

SEMI-FIXED TRIMMERS
CI & LU Series: Cermet & Carbon
INTRODUCTION
CERMET
Metal glazed ceramic construction is suitable for
circuit tuning where high temperature range &
relative temperature stability is important.
CARBON
Carbon film semi-fixed resistors offer a very low cost
alternative for circuit tuning where temperature
stability is not a problem.
FEATURES
•Temperature Range -25°C to +100°C
•Temperature Coefficient 300ppm/°C
•Low Residual Resistance
•Low Cost
SPECIFICATIONS
Characteristics
Rated Wattage
Specifications (Cermet)
6 0.2W @ 70°C
8 0.5W @ 70°C
Resistance Range
100 ~ 1M
Standard Tolerance
Resistance Taper
Residual Resistance
±20%
Linear B Curve
R < 500, 5 max
R > 500, 1% max
Max Operating Voltage 6 100VDC
8 250VDC
Temperature Range 6 -25°C ~ +100°C
8 -40°C ~ +100°C
Temperature Coefficient ±300ppm
Total Rotation Angle
Rotational Torque
Stopper Strength
Rotational Life
240° ±10°
30 -300 g/cm
300 g/cm min.
10% max, resistance change
after 50 rotation cycles
Specifications (Carbon)
0.1W @ 70°C
100 ~ 2M
±20%
Linear B Curve
2% of overall or 10K
max, 20 min.
100VDC
-25°C ~ +70°C
270° ±20%
30-350 g/cm
1kg/cm min.
100 Turns ±15% max.
CERMET DIMENSIONS 6 (CI)
CARBON DIMENSIONS 8 (LU)
CI-065
CERMET DIMENSIONS 8 (CI)
LU-083
LU-085
SHAFT OPTION FOR CERMET 8 TYPE
CI-083
CI-083R
(A or B)
PS
KS1
CI-085
KS2
KS3
HOW TO MAKE A PART NUMBER
Series Code
Shaft Option
Resistance
Tolerance
CI-065-KS1-10K-M
RFE International • Tel:[phone] • Fax:[phone] • E-Mail [e-mail]
C2CB06
REV 2002.02.07