R1EX24008ASA00A Datasheet, PDF (9/22 Pages) Renesas Technology Corp – Two-wire serial interface 8k EEPROM (1-kword × 8-bit)

R1EX24008Axx00A
Functional Description
Start Condition
A high-to-low transition of the SDA with the SCL high is needed in order to start read, write operation
(See start condition and stop condition).
Stop Condition
A low-to-high transition of the SDA with the SCL high is a stop condition. The stand-by operation starts
after a read sequence by a stop condition. In the case of write operation, a stop condition terminates the
write data inputs and place the device in a internally-timed write cycle to the memories. After the
internally-timed write cycle which is specified as t_WC, the device enters a standby mode (See write cycle
timing).
Start Condition and Stop Condition
SCL
SDA
(in)
Start condition
Stop condition
REJ03C0351-0001 Rev.0.01 Dec. 28, 2007
Page 9 of 20