M51955A Datasheet, PDF (9/12 Pages) Mitsubishi Electric Semiconductor – VOLTAGE DETECTING, SYSTEM RESETTING IC SERIES

M51955A,B/M51956A,B
Setting of Output Load Resistance (M51955B/M51956B)
High level output voltage can be set without depending on the power-supply voltage because the output terminal is an
open collector type. However, please guard the following notes.
1. Please set it in value (2 V to 17 V) within the range of the power-supply voltage recommendation.
Moreover, please never impress the voltage of maximum ratings 18 V or more even momentarily either.
2. Please set output load resistance (pull-up resistance) R_L so that the output current (output inflow current I_L) at L
level may become 4 mA or less. Moreover, please never exceed absolute maximum rating (6 mA).
V_CC (2V to 17V)
R_L
6
I_L ≤ 4mA
Figure 6 Output Load Resistance R_L
Others
1. Notes when IC is handled are published in our reliability handbook, and please refer it.
The reliability handbook can be downloaded from our homepage (following URL).
http://www.renesas.com/fmwk.jsp?cnt=reliability_root.jsp&fp=/products/common_info/reliability
2. Additionally, please inquire of our company when there is an uncertain point on use.
REJ03D0777-0200 Rev.2.00 Aug 20, 2007
Page 9 of 11