M16C63_15 Datasheet, PDF (85/119 Pages) Renesas Technology Corp – RENESAS MCU

M16C/63 Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 3 V
Table 5.42 Electrical Characteristics (2)
V_CC1 = V_CC2 = 2.7 to 3.3 V, V_SS = 0 V at T_opr = −20°C to 85°C/−40°C to 85°C, f_(BCLK) = 20 MHz unless otherwise specified.
Symbol
Parameter
Measuring Condition
Standard
Min. Typ. Max.
Unit
I_CC
Power supply current High-speed mode f_(BCLK) = 20 MHz (no division)
In single-chip, mode,
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
the output pin are
CM15 = 1 (drive capacity High)
open and other pins
are V_SS
A/D converter stopped
f_(BCLK) = 20 MHz (no division)
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
9.5
mA
10.2
mA
CM15 = 1 (drive capacity High)
A/D converter operating ⁽²⁾
f_(BCLK) = 20 MHz
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
9.2
mA
CM15 = 0 (drive capacity Low)
A/D converter stopped
f_(BCLK) = 20 MHz (no division)
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
CM15 = 1 (drive capacity High)
PCLKSTP1 = FF (peripheral clock stopped)
7.9
mA
f_(BCLK) = 20 MHz (no division)
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
CM15 = 0 (drive capacity Low)
7.6
mA
40 MHz on-chip
oscillator mode
PCLKSTP1 = FF (peripheral clock stopped)
Main clock stopped
40 MHz on-chip oscillator on,
divide-by-2 (f_(BCLK) = 20 MHz)
125 kHz on-chip oscillator stopped
9.0
mA
125 kHz on-chip
oscillator mode
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on, no division
450.0
μA
Low-power mode
FMR22 = 1 (slow read mode)
f_(BCLK) = 32 MHz
FMR 22 = FMR23 = 1 (in low-current
consumption read mode)
80.0
μA
On flash memory ⁽¹⁾
Wait mode
f(BCLK) = 32 kHz
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on
5.3
μA
PM25 = 1 (peripheral function clock fC operating)
T_opr = 25°C
Real-time clock operating
f_(BCLK) = 32 MHz
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
5.0
μA
PM25 = 0 (peripheral function clock fC stopped)
T_opr = 25°C
Stop mode
T_opr = 25°C
2.2
μA
During flash
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
memory program _{VCC1 = 3.0 V}
20.0
mA
During flash
memory erase
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
V_CC1 = 3.0 V
30.0
mA
Notes:
1. This indicates the memory in which the program to be executed exists.
2. A/D conversion is executed in repeat mode.
R01DS0033EJ0220 Rev.2.20
Nov 01, 2012
Page 85 of 115