UPG2411T7C Datasheet, PDF (8/11 Pages) Renesas Technology Corp – GaAs Integrated Circuit SPDT Switch for 2 GHz to 6 GHz

μPG2411T7C
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and
conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Infrared Reflow
Partial Heating
Soldering Conditions
Peak temperature (package surface temperature) : 260°C or below
Time at peak temperature
: 10 seconds or less
Time at temperature of 220°C or higher
: 60 seconds or less
Preheating time at 120 to 180°C
: 120±30 seconds
Maximum number of reflow processes
: 3 times
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
Peak temperature (terminal temperature)
Soldering time (per side of device)
: 350°C or below
: 3 seconds or less
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
Condition Symbol
IR260
HS350
CAUTION
Do not use different soldering methods together (except for partial heating).
R09DS0004EJ0100 Rev.1.00
Jun 17, 2010
Page 8 of 9