R0E00008AKCE00EP64 Datasheet, PDF (72/80 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 5 Differences between the MCUs and the Emulator
14. The emulator uses a two-word stack pointer for values stored on a user program break.
Therefore, the stack area must accept two-word addresses.
15. Do not use an MCU that has been used for debugging.
If the flash memory is rewritten many times, data may be lost due to retention problems after
the emulator has been left for a few days and the data will be erased. If an error message is
displayed, exchange the MCU for a new one.
Rev. 1.00 Aug. 03, 2009 Page 20 of 24
REJ10J2024-0100