R2A20104-114 Datasheet, PDF (7/12 Pages) Renesas Technology Corp – Continuous Conduction Mode Interleaving PFC Control IC

R2A20104/114 Series
Absolute Maximum Ratings
Item
Symbol
Value
Unit
Note
Supply voltage
VCC
–0.3 to +24
V
3
GD1 and 2
Peak current Ipk-gd1, Ipk-gd2
±1
A
3, 4
DC current
Idc-gd1, Idc-gd2
±0.1
A
3
Vref terminal current
Iref
–5
mA
3
Terminal current
It-group
±1
mA
3, 5
RS terminal current
Irs
–500
μA
3
RT terminal current
Irt
–200
μA
3
RAMP terminal current
Iramp
–200
μA
3
BO clamp current
Ibo
300
μA
3
Terminal voltage
Vt-group
–0.3 to Vref
V
3, 6
Vref terminal voltage
Vt-ref
–0.3 to Vref+0.3
V
3
SS terminal voltage
Vt-ss
–0.3 to Vref+1
V
3
Power dissipation
Pt
1
W
3, 7
Operating ambient temperature
Ta-opr
–40 to +125
°C
Junction temperature
Tj
–40 to +150
°C
8
Storage temperature
Tstg
–55 to +150
°C
Notes: 1. Rated voltages are with reference to the AGND and PGND terminal.
2. For the direction of Rated currents, (+) denotes the current flowing into the IC, and (–) denotes the current
flowing out of the IC.
3. Ambience temperature, Ta is 25 degrees centigrade.
4. Transient current when driving a capacitive load.
5. Rated currents of the terminals listed below:
COMP, CSO1, CSO2
6. Rated voltages of the terminals listed below:
in the case of R2A20104FP/R2A20114FP: CS1, CS2, VAC, RS, FB, PD, BO, ERROR, E-DLAY, OFF,
OVP2, FMC, FMR, RT/SYNC, IRAMP, SYNC-O, CT, COMP,
CSO1, CSO2
in the case of R2A20104SP/R2A20114SP: CS1, CS2, VAC, RS, FB, BO, IRAMP, FM, RT/SYNC, CT,
COMP, CSO1, CSO2
7. Thermal resistor
in the case of R2A20104FP/R2A20114FP: θja = 85.3 degrees centigrade/W
in the case of R2A20104SP/R2A20114SP: θja = 120 degrees centigrade/W
These values are obtained under the condition that the IC is mounted on the glass epoxy board, of which size
is 50 × 50 × 1.6 [mm] and wiring density is 10%.
8. Stresses exceeding the absolute maximum ratings may damage the device.
These are stress ratings only. Functional operation above the recommended operating ambient temperature
range is not implied.
Extended exposure to stresses above the absolute maximum ratings may affect device reliability.
R03DS0008EJ0301 Rev.3.01
Jan 08, 2016
Page 7 of 11