HA16142FP Datasheet, PDF (7/20 Pages) Renesas Technology Corp – PFC and PWM Controller

HA16141P/FP, HA16142P/FP
Absolute Maximum Ratings
(Ta = 25°C)
Item
Symbol
Rating
Unit
Note
Supply voltage
V_CC
20
Peak PFC-OUT current
Ipk-pfc
±1.5
V
A
3
Peak PWM-OUT current
Ipk-pwm
±1.0
A
3
DC PFC-OUT current
Idc-pfc
±0.15
A
DC PWM-OUT current
Idc-pwm
±0.10
A
Terminal voltage
Vi-group1
Vi-group2
−0.3 to V_CC
−0.3 to Vref
V
4
V
5
CAO voltage
Vcao
−0.3 to Veoh-ca
V
PFC-EO voltage
Vpfc-eo
−0.3 to Veoh-pfc
V
PWM-EO voltage
Vpwm-eo
−0.3 to Veoh-pwm
V
PFC-ON voltage
Vpfc-on
−0.3 to +7
V
IAC voltage
Vi-ac
−0.3 to +5
V
IAC current
Ii-ac
0.8
mA
PFC-CS voltage
Vi-cs
−1.5 to +0.3
V
TIM voltage
Vi-tim
−0.3 to +6
V
VREF current
Io-ref
−20
mA
PG voltage
Vo-pg
−0.3 to +7
V
PG current
Io-pg
15
mA
Power dissipation
Operating temperature
P_T
Topr
1
−40 to +105
W
6
°C
Storage temperature
Tstg
−55 to +150
°C
Junction temperature
Tj
150
°C
Notes: 1. Rated voltages are with reference to the GND pin.
2. For rated currents, inflow to the IC is indicated by (+), and outflow by (−).
3. Shows the transient current when driving a capacitive load.
4. Group1 is the rated voltage for the following pins: PFC-OUT, PWM-OUT
5. Group2 is the rated voltage for the following pins: VREF, PFC-FB, PWM-CS
6. This is the value when the ambient temperature (Ta) is 25°C or below. If Ta exceeds 25°C, the
graph below applies. For the SOP package, this value is based on actual measurements on a
10% wiring density glass epoxy circuit board (40 mm × 40 mm × 1.6 mm).
25°C
105°C
1
0.5
0
−40
−8mW/°C
0
50
100
150
Ambient temperature Ta (°C)
Rev.4, Sep. 2001, page 5 of 5