M37150M6 Datasheet, PDF (5/141 Pages) Renesas Technology Corp – SNGLE-CHIP 8-BIT CMOS MICROCOMPUTER

M37150M6/M8/MA/MC/MF-XXXFP, M37150EFFP
6. PERFORMANCE OVERVIEW
Table 6.1 Performance Overview
Parameter
Number of basic instructions
Instruction execution time
Clock frequency
Memory size
Input/Output
ports
ROM ^{M37150M6-XXXFP}
M37150M8-XXXFP
M37150MA-XXXFP
M37150MC-XXXFP
M37150MF-XXXFP
RAM ^{M37150M6-XXXFP}
M37150M8-XXXFP
M37150MA-XXXFP, M37150MC-XXXFP
M37150MF-XXXFP, M37150EFFP
P0
I/O
P10–P16
I/O
P20–P27
I/O
P30, P31
I/O
Functions
71
0.447 ms (the minimum instruction execution time, at 3.58 MHz oscillation
frequency, f(XIN) = 8.95 MHz)
0.451 ms (the minimum instruction execution time, at 4.43 MHz oscillation
frequency, f(XIN) = 8.86 MHz)
8.95 MHz (maximum)
24K bytes
32K bytes
40K bytes
48K bytes
60K bytes
1024 bytes (ROM correction memory included)
1152 bytes (ROM correction memory included)
1472 bytes (ROM correction memory included)
2048 bytes (ROM correction memory included)
8-bit ✕ 1 (N-channel open-drain output structure, can be used as PWM
output pins, INT input pins, A-D input pin)
7-bit ✕ 1 (CMOS input/output structure, however, N-channel open-drain
output structure, when P11–P14 are used as multi-master I²C-BUS inter-
face, can be used as A-D input pins, timer external clock input pins, multi-
master I²C-BUS interface)
8-bit ✕ 1 (P2 is CMOS input/output structure, however, N-channel open-
drain output structure when P20 and 21 are used as serial output, can be
used as serial input/output pins, timer external clock input pins, A-D input
pins, INT input pin, sub-clock input/output pins)
2-bit ✕ 1 (CMOS input/output structure, however, N-channel open-drain output structure,
when used as multi-master I²C-BUS interface, can be used as multi-master I²C-BUS interface.)
P50, P51
P52–P55
Serial I/O
Multi-master I²C-BUS interface
A-D comparator
PWM output circuit
Timers
ROM correction function
Subroutine nesting
Interrupt
Input
Output
2-bit ✕ 1(can be used as OSD input pins)
4-bit ✕ 1(CMOS output structures, can be used as OSD output pins)
8-bit ✕ 1
One (Three lines)
8 channels (7-bit resolution)
8-bit ✕ 5
8-bit ✕ 6
2 vectors
128 levels (maximum)
<17 types>
INT external interrupt ✕ 3, Internal timer interrupt ✕ 6, Serial I/O interrupt ✕
1, OSD interrupt ✕ 1, Multi-master I²C-BUS interface interrupt ✕ 1, Data
slicer interrupt ✕ 1, f(XIN)/4096 interrupt ✕ 1, VSYNC interrupt ✕ 1, BRK
instruction interrupt ✕ 1, reset ✕ 1
Clock generating circuit
2 built-in circuits (externally connected to XCIN/OUT is a ceramic resonator
or a quartz-crystal oscillator)
Data slicer
Built-in
Rev.1.00 Nov 01, 2002 page 5 of 139
REJ03B0128-0100Z