M30260F6AGPU5A Datasheet, PDF (5/30 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

M16C/26A Group (M16C/26A, M16C/26B, M16C/26T)
1. Overview
Table 1.2. Performance outline of M16C/26A group (M16C/26A, M16C/26B) (42-pin device)
Item
Performance
CPU
Basic instructions
Minimun instruction
91 instructions
41.7 ns (f(BCLK) = 24 MHz ⁽⁴⁾, VCC = 4.2 to 5.5 V
(M16C/26B)
execution time
50 ns (f(BCLK) = 20 MHZ, VCC = 3.0 to 5.5 V)
(M16C/26A, M16C/26B)
100 ns (f(BCLK) = 10 MHZ, VCC = 2.7 to 5.5 V)
(M16C/26A, M16C/26B)
Operation mode
Single-chip mode
Address space
1M byte
Memory capacity
See 1.4 Product Information
Peripheral
Port
33 I/O pins
function
Multifunction timer
Timer A: 16 bits x 5 channels, Timer B: 16 bits x 3 channels
Three-phase motor control timer
Serial I/O
1 channel (UART, clock synchronous serial I/O)
1 channel (UART, clock synchronous, I²C bus⁽¹⁾ , or IEBus⁽²⁾)
A/D converter
10 bit A/D converter: 1 circuit, 10 channels
DMAC
2 channels
CRC calcuration circuit
1 circuits (CRC-CCITT and CRC-16) with MSB/LSB selectable
Watchdog timer
15 bits x 1 channel (with prescaler)
Interrupt
18 internal and 8 external sources, 4 software sources,
Interrupt priority level: 7
Clock generation circuit
4 circuits
Main clock(*), Sub-clock(*)
On-chip oscillator, PLL frequency synthesizer
(*)Equipped with a built-in feedback resister.
Oscillation stop detection Main clock oscillation stop, re-oscillation detection function
Voltage detection circuit
On-chip
Electrical
Supply voltage
VCC = 4.2 to 5.5 V (f(BCLK) = 24 MHZ)⁽⁴⁾
(M16C/26B)
Characteristics
VCC = 3.0 to 5.5 V (f(BCLK) = 20 MHZ)
(M16C/26A, M16C/26B)
VCC = 2.7 to 5.5 V (f(BCLK) = 10 MHZ)
Power Consumption
16 mA (Vcc = 5 V, f(BCLK) = 20 MHz)
25 µA (f(XCIN) = 32 KHz on RAM)
3 µA (Vcc = 3 V, f(XCIN) = 32 KHz, in wait mode)
0.7 µA (Vcc = 3 V, in stop mode)
Flash memory Programming/erasure
2.7 to 5.5 V
voltage
Programming/erasure
100 times (all area) or 1,000 times (block 0 to 3)
endurance
Operating Ambient Temperature
/ 10,000 times (block A, block B)⁽³⁾
-20 to 85°C / -40 to 85°C ⁽³⁾
Package
42-pin plastic molded SSOP
NOTES:
1. I²C bus is a trademark of Koninklijke Philips Electronics N. V.
2. IEBus is a trademark of NEC Electronics Corporation.
3. See Table 1.7 Product Code for the program and erase endurance, and operating ambient temperature.
4. The PLL frequency synthesizer is used to run the M16C/26B at f(BCLK) = 24 MHz.
Rev. 0.51 Jul.25, 2006 ^{page 3} of 26
REJ03B0071-0051